Toyota MR2 MK2 (91-99) Front Indicators/Side Repeaters - Clear

  1. ● FITS:
  2. Toyota MR2 MK2 (Type - SW20) (1991 to 1999) ●
  3. CONTENTS:
  4. 1 x left side repeater unit, 1 x right side repeater unit; 1 x left indicator unit, 1 x right indicator unit; 2 x 21W amber indicator bulbs; 2 x 5W amber indicator bulbs ●
  5. RESTRICTIONS:
  6. These lamps are intended for UK/European spec cars. Fitment on an import may differ ● READ MORE...

Description

  • Clear front indicators & side repeaters
  • Direct Replacement for Original Equipment - No modification required

Compatible Vehicles

  • Toyota MR2 MK2 (Type - SW20) (1991 to 1999)

  • Restrictions:
    • These lamps are intended for UK/European spec cars. Fitment on an import may differ
    • Very early UK models (1991) used the US connector. As this included a separate sidelight, modification will be required. The connector will have to be removed and the wiring connected directly to the car's existing connector
Toyota MR2 MK2 (Type - SW20) (1991 to 1999)
These lamps are intended for UK/European spec cars. Fitment on an import may differ
Very early UK models (1991) used the US connector. As this included a separate sidelight, modification will be required. The connector will have to be removed and the wiring connected directly to the car's existing connector

Contents

  • 1 x left front indicator unit with bulb holder
  • 1 x right front indicator unit with bulb holder
  • 1 x left side repeater unit (use original bulb holder)
  • 1 x right side repeater unit (use original bulb holder)
  • 2 x 21W amber indicator bulbs
  • 2 x 5W amber side repeater bulbs

Additional Info:

  • 12 months manufacturer warranty
  • Car modifications are carried out at the owners risk and expense
  • Front indicators are E-Marked / Side repeaters are E-Marked
  • White/black wire is the earth, green wire connects to the sidelight and green/red wire connects to the indicator
  • Reflector fitment: When fitting the reflector section, make sure that the reflector is pushed in firmly until a click is heard, locking it in place. Failing to do this can result in the reflector falling out
  • Fits European model with the extra side light and 2 wiring looms going into one connector block. Import has single wiring loom with twin filament bulb. UK connector is square with 2 vertical pins and 1 horizontal pin. Import has an oval connector with 3 pins in a row
  • Condensation forming inside a light unit is not considered to be a fault by manufacturers as it is impossible to avoid under certain atmospheric conditions. If you do not accept this condition then please do not buy the lights.