KFZ EVAP Rauch Maschine Rauch Leck Leckdetektor Kraftstoffrohrsystem Prüfer
1、Description about T100
Video:
 
Description:
MR CARTOOL T100 Car Smoke Leak Detector is an entry-level automotive pipeline leak detection tool.
Simple operation, one-key start, no learning cost. Help us quickly and accurately locate the leakage of cars and motorcycles in the pipeline system.
 
Features:
1.Equipped with a built-in air pump and smoke generator. The smoke can be generated within 10 seconds after switch-on with stable and large amount of output.
2.Works on all vehicle models, including detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
3.With built-in overheat and cold-proof protection, it can be used in various environments and operated safely.
4.This device features a refreshing look, compact size, light weight and portability, and is easy to use. Perfect for simple pipe leak
5.2 years warranty.
 
Parameter:
Output pressure:8~12Psi
Output flow:4L/Min

Power supply: 12V

Air source: built-in

Test oil capacity:10ML

Dimensions of the Main Unit: 110x155x230mm
Package weight:3.7KG
 
Main Unit Structure :
 
Easy to do leakage test :
1. Unscrew the oil filler cap and fill it with10ml baby oil into the detector for the first time.
2. Connect the car battery, then turn on the air pump and smoke generator.
3. Connect the smoke hose to the pipeline to be tested through the adapter.
4. In about 10 seconds, the leaks can be found according to where the smoke appears.
Caution:
1. When you use this MR CARTOOL T100 Car Smoke Leak Detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range.
2. The testing liquid: both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
 
Packing Includes:
1pc* MRCARTOOL T100 automotive smoke leak detector  main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc* Test oil bottle(oil not included) 
1pc* Rubber connector part
1pc* Standard cone adapter
1pc* Hook
1pc* User manual
1pc* EVAP Special Connector
1pc*value core wrench
1 set hard rubber hose plug(8pc)
 
2、Description about T105
Video:
 
Product Description:
MR CARTOOL T105 Smoke Leak Detector is a universal and professional automobile pipe leakage smoke tester. It allows you to determine the leak points more quickly within a few minutes. By observing the pressure indicator, the leakage is clear at a glance.Moreover, our smoke tester is detachable, small in size, easy to store, time-saving and labor-saving, and it is widely used in various auto repair shops and DIYer technicians.
 
Product parameter:
Output pressure:12~14Psi
Output flow:4L/Min
Power supply: 12V
Air source: Built-in
Test oil capacity:10ML
Dimensions of the Main Unit: 160x280x190mm
Package weight: 3.8KG
 
Caution:
1. When you use this MR CARTOOL T105 Car Smoke Leak Detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range.
2. The testing liquid: both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
 
Feature:
1. FAST SMOKE OUTPUT: MR CARTOOL T105 Smoke Leak Detector is equipped with a built-in air pump and smoke generator. The smoke can be generated within 10 seconds after switch-on with stable and large amount of output.
2. WIDE USAGE: Works on all vehicle models, including detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks, and speedboats boats.
3. DUAL MODE DESIGN: Smoke Mode and Air Mode separately controlled and pressure gauge equipped, designed for detecting the leakage of pipe systems on cars, motorcycles, boats, such as fuel pipe, air intake system EVAP system, and cooling tank.
4. 2-YEAR WORRY-FREE SERVICE: Fast and safe delivery; Within 24h professional after-sale team service, 2-year warranty, and lifetime maintenance.
 
 
Easy to use:
1. Unscrew the oil filler cap and fill it with10ml baby oil into the detector for the first time.
2. Connect the car battery, then turn on the air pump and smoke generator.  
3. Connect the smoke hose to the pipeline to be tested through the adapter.
4. In about 10 seconds, the leaks can be found according to where the smoke appears.
 
Packing list:
1pc* MRCARTOOL T105 automotive smoke leak detector main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Valve core wrench
1pc* EVAP special connector & rubber connector part
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
3.Description about T110:
Video:
 
Product Description:
MR CARTOOL automotive smoke leak detector is a specialty tool used with vehicle diagnostic devices to check the tightness of the vehicle pipeline system and find leaks, helping the auto repair technician to quickly and accurately determine whether the fault is caused by the pipeline leaks.
 
Functions and Features:
The Main Function:
Tightness Test : It can test the tightness and leakage of the tested pipeline under system pressure.
Intake System Test: it can test the air tightness and damage degree of the pipes in the intake system.
Exhaust System Test: it can test the air tightness and damage degree of the pipes in the exhaust system.
EVAP System Test:it can test the leakage of fuel evaporation in the EVAP system.
Main Features:
1.More directly, accurate and faster than traditional leak detection methods such as soap bubbles and throttle cleaners.
2.Adopting smoke generator technology facilitate smoke stability and large amount output.
3.Built-in air pump, ready for testing and maintenance.
4.Compact, lightweight design allows for any placement of machine for work.
5.Test oil is non-toxic and non-corrosive
 
 
Product parameter:
Output pressure:14~16Psi
Output flow:6L/Min
Power supply: 12V
Air source: built-in
Test oil capacity:15ML
Dimensions of the Main Unit:230x140x248mm
 
Packing list:
1pc* MRCARTOOL T110automotive smoke leak detector  main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Soft rubber hose plug
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Hook
1pc*Rubber connector part
1pc* EVAP specilal connector &  Valve core wrench
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
 
4. Description about T130
Video:      
Product description:
MR CARTOOL T130 Car Smoke Leak Detector is a professional detector which can carry out comprehensive leak detection on automobile pipelines. It is easy to use and works flawlessly. It is an excellent tool for locating and repairing pipessuch as car intake, exhaust and emission leaks, and is even more beneficial for maintaining your car, making it healthier and improving driving security.

Feature:
1. FAST SMOKE OUTPUT: Equipped with a built-in air pump and smoke generator. The smoke can be generated within 10 seconds after switch-on with stable and large amount of output.
2. AIR & SMOKE MODES: Air mode: The air pump can be regulated separately. Smoke mode: The smoke generator can be regulated separately
3. THREE KINDS OF DISPLAY METER: With visuable oil meter and pressure gauge, the test oil and pressure can be obviously observed. The flow meter has a regulator for adjusting the amount as needed.
4. VARIOUS PIPELINE TESTINGS:  The MRCARTOOL T130 smoke leak detector can deteck leaks in various pipeline, including EVAP system, Gearbox, Intake&Exhaust system, Cooling system and Engine air tightness. (Various fittings are equipped.)
5. WORRY-FREE SERVICE:Fast and safe delivery; Within 24h professional after-sale team service, 2-year warranty, and lifetime maintenance.

Easy to use :
1. Unscrew the oil filler cap and fill it with10ml baby oil into the detector for the first time.
2. Connect the car battery, then turn on the air pump and smoke generator.
3. Connect the smoke hose to the pipeline to be tested through the adapter.
4. In about 10 seconds, the leaks can be found according to where the smoke appears.

Product parameter:
Warranty: 2 Year
Brand: MRCARTOOL
Output pressure:15~17Psi 
Output flow: 6L/Min
Power supply: DC 12V Battery
Air source: built-in
Test oil capacity:10ML
Dimensions of the Main Unit:280*190*160mm
Package weight:4KG
Package Size:295*295*210mm 
Caution:
1. When you use this MR CARTOOL T130 Car Smoke Leak Detector for the first time, fill it with 10ml baby oil. Please be careful NOT to beyond this range.
2. The testing liquid: both liquid paraffin and baby oil are OK.
3. Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4. Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5. During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
7. The detector has an intelligent protector, if it exceeds the working limit, such as over 80 ℃, it will automatically turn off the power. In this case, please operate it later.
8. The round part of this detector has temperature, please be careful to avoid burns.
9. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.
 
Packing list:
1pc* MRCARTOOL automotive smoke leak detector T130 main unit
1pc* Power cord clamp
1pc* Smoke hose
1pc set* Soft rubber hose plug
1pc set* Hard rubber hose plug
1pc* Test oil bottle
1pc* Valve corde wrench
1pc* EVAP specilal connector & rubber connector part
1pc* Standard cone adapter
1pc* Universal airbag adapter
1pc* User manual
1pc* For BMW Professional Tool
1200×1200
 

 
PushAuction