Driver board features:
1. Adopt series resonant inverter control scheme and PDM power

adjustment technology used in induction heating power supply.
2. The whole board adopts high-quality electronic components!
3. Double totem output, stronger driving ability.
4. Built-in pulse width protection function.
5. The power consumption of the whole board is extremely low, and the maximum is no more than 10W (no load).
6. 5LED indication, modular lead.
7. Optical fiber interface input operation signal.
8. Professional double-sided wiring design.
9. This drive circuit is suitable for large, medium and small electronic Tesla coils, and can be used for DRSSTC and QCWDRSSTC with various long and short pulse widths! Used for large TC and GDT direct push IGBT module!

10. With the function of allowing the Tesla coil to operate at a constant current in the primary resonant circuit.

Application parameters:
The power supply voltage input is 18-21VAC (18V output transformer is recommended). It is recommended to use Tianzheng BK-50VA 220V to 18V or 380V to 18V.
Feedback input interface: <2A peak value <600kHz
OCD input interface: <1A peak
Drive current: <35A peak (conditional test)
Interrupt input pulse width: 10us-30ms
Fiber head model: HFBR2412T
Optical fiber interface type: ST
PCB size: 130 X 84mm

Matters needing attention:
1. Since DRSSTC works in a strong magnetic state, it will generate induced current on surrounding

metal objects including wires, cables, and nearby electronic equipment. Please shield the

driver board and reliably ground it.
2. The driver board is not suitable for CW working mode, which may cause damage to the components

 

 

Dear users, because Tesla coil is a special high-voltage equipment, for your safety and

the safety of people around, please read the following instructions carefully.

 

Disclaimer

The manufacture and operation of solid-state Tesla coils may cause personal injury or property damage,

and the resulting consequences have nothing to do with the designer and seller of this equipment.

Safety warning

 

Since the solid-state Tesla coil works in a strong magnetic field and a strong electric field,

it will induce current on the surrounding metal objects, including wires, cables,

and nearby electronic devices, and generate strong electromagnetic radiation.

 

Those with a pacemaker are not allowed to use it!

 

People with pacemakers please stay away from the equipment!

 

Therefore, if there are carriers of implanted/non-implanted electronic medical

equipment around, the power-on experiment may cause these equipment to malfunction and cause life-threatening.

 

For the above reasons, please ensure that the equipment used is well grounded, and ensure a sufficient

safety distance from the solid-state Tesla coil during operation. You must be aware of the power of the

Tesla coil you design and the reliable safety distance and the required safety distance. Safety measures,

and ensure that all personnel are located in a safe area! The solid-state Tesla coil is a very dangerous device.

Keep a safe distance during operation! (Note: The above distance is only the distance that is not struck

by the arc, and does not represent absolute safety. The user must be aware of the other effects of the Tesla coil)

 

The solid-state Tesla coil control and power output parts have voltages greater

than the safe voltage, and direct contact with limbs is prohibited during operation and debugging.

 

There is a large-capacity energy storage device in the solid-state Tesla coil.

After the power is cut off, it still has a lethal voltage. The charge in the energy

storage device must be released first when debugging. When a bleeder component is installed,

wait a few minutes before debugging. Manual short-circuit discharge is prohibited,

as this will damage the energy storage device.

 

 

Fire warning

 

Since the solid-state Tesla coil is working, the power components, radiators and other parts will

generate heat, especially when it is continuously working, it will be very obvious, so relevant fire-fighting

facilities should be placed in the working place of the solid-state Tesla coil, and it is strictly forbidden

to nearby Place flammable and explosive materials, and ensure that the cooling fan is

in working condition throughout the working process.

 

Buyer notice:

1. By default, this drive circuit is sold as a finished drive (see delivery list).

2. The default delivery is in accordance with the default parameters. If the parameters used

by the buyer are not within the default range, please contact the owner.

3. Component changes and product upgrades are subject to no prior notice,

and may differ from the product photos. We do not accept negative reviews.

4. There is a slight difference in color between the real object and the photo,

which is caused by the difference of the camera!

5. Due to different people in DRSSTC have problems with the selection of

power components, failures (such as explosion tubes, etc.) have nothing to do with the drive board.

6. Corresponding tests are done before shipment to ensure that all parameters meet

the requirements. After receiving the goods, please do a simple test. The loan is

deemed as the product has no quality problems.