 |
Specifications
Condition:100% Brand New
Color:White Material:ABS Volume:113~25dB Power Supply (Receiver)Micro USB or AA alkaline battery x 3 (not included) Power Supply (PIR Transmitter):Micro USB or AAA alkaline battery x 3 (not included) Battery lifespan:5-7 months (based on 30 minutes per day) Wireless range:280m/918ft Motion detecting range:2 - 8 m/6.6-26ft Working frequency:433.92MHz Certification:CE, CCC, CQC |
Package content:
|
 |
 |
 |
| Doorbell Mode: door open chime, 36 selectable chimes tunes for your choice Night Light Mode: Can be floodlight, when the magnetic sensor activated, the receiver automatically turn on the light, with 4 adjustable levels brightness |
Welcome Mode: 5 language of "Welcome", suitable for shops, stores, restaurants, supermarkets... Alarm Mode: up to 113dB alarm, effectively help to deter the intruder, wake or alert you if at home and possibly alert neighbors |
Colorful Light Mode: no sound, 4 colors for your choice, suitable for quiet environment |
|
【
Shop keeper in day time, anti-thief in the night】
Place the PIR motion sensor at the entrance to your driveway or
anywhere you want to be alerted to motion, it detects movemets
and sends a wireless signal to the portable receiver from up to 918 feet (280m) away. up to 113dB loud sound
|
|
♚【
8 chord music chip, 40mm big horn,36 chime melodies remember your last set melody andvolume level once powered off
♚【 Colorful LED lights】 adjustable brightness, distinguish multiple entrances by different colors ♚【 4 stages adjustable volume】 (Loud/High/Middle/Low ) from 113- 25dB |
|
|
DIY Pairing
The receiver can learn from up to 32 wireless sensors
like PIR motion, magnetic or vibration sensor as well as
up to 8 remote controllers.
|
|
EASY INSTALLATION
As for this visitor motion chime, there are no wires to run,
no installation hassles, the sensor is wall mountable
before using,please read the manual carefully and put in batteries (not included),adjust the sensor's angle avoid false alarming
|
|
 |
 |
 |
 |
 |
 |
How to pair the Infrared Sensor/Magnetic Sensor/Remote Control:
1.Press shutdown button to turn off the receiver.
2.Press the volume button for 3 seconds until you hear a sound DU and the Indicator lights up to enter the pairing mode, and then release the volume button.（Please make sure that the infrared sensor and receiver both have enough power.）
3.Turn on the infrared sensor and Wave your hand on the infrared sensor surface/Separate magnetic sensor/Press any button on the remote control to trigger the sensor to complete the pairing.
PS:If you need to set a special light or ringtone for the additional Sensor/Magnetic Sensor, please repeat the steps above to pair them one by one.Otherwise, you can continuously trigger the Sensor/Magnetic Sensor to pairing after enter the pairing mode.
How to delete all paired devices?
1.Press shutdown button to turn off the receiver.
2.Press the volume button for 10 seconds until you hear a sound "DU DU DU" and Red light flashes three times,all devices are deleted.
How to set up the ringtones/volume?
1.Press "M" button to select the model you want, press once to switch one mode.1.Welcome Model 2.Doorbell model 3.Alarm Mode 4.Color Light Model 5.Light Mode
2.Press "Music" button to select the ringtones you want, press once to switch one ring./Press "volume" button to adjust volume,4 level volume adjustable,press once to switch one level.
How to set up the light color?
1.Press shutdown button to turn off the receiver.
2.Press the volume button for 3 seconds until you hear a sound DU and the Indicator lights up to enter the pairing mode,Press music button to choose the light color you want.
3.Turn on the infrared sensor and Wave your hand on the infrared sensor surface/Separate magnetic sensor/Press any button on the remote control to trigger the sensor to complete the pairing.
Each color can be paired with up to 8 infrared /magnetic sensors and 4 colors are available, so you can pair up to 32 infrared /magnetic sensors
