144.99€ SDT106	199€ SDT202	219€ SDT203	229€ SDT205	249€ SDT205S	310€ SDT206	429€ SDT208
Output Pressure	＜12Psi	＜12Psi	<15Psi	＜15Psi	＜15Psi	＜18Psi	＜10psi/ 35psi
Output Flow	＜5(L/min)	＜5 (L/min)	＜6(L/min)	＜6(L/min)	＜6(L/min)	＜6(L/min)	＜15(L/min)
Package Weight	3.55kg	3.8kg	2.5kg	3.6kg	3.7kg	5.5kg	6.55kg
Main Unit Dimensions	210x135x110mm	210x135x110mm	190X130X85mm	250x160x165mm	250x160x165mm	275x150x150mm	280x210x180mm
Package Dimensions	275x220x255mm	275x220x255mm	227x160x242mm	295x295x210mm	295x295x210mm	270x220x255mm	350x250x300mm
Air Mode				✔	✔	✔	✔
Smoke Mode	✔	✔	✔	✔	✔	✔	✔
Built-in Air Pump	✔	✔	✔	✔	✔	✔	✔
Flow Control Valve			✔		✔	✔	✔
Pressure Gauge		✔	✔	✔	✔	✔	✔
Oil Output				✔	✔	✔	✔ & Smoke Outlet
Oil Level Gauge						✔	✔
Power supply	DC12V battery	DC12V battery	DC12V battery	DC12V battery	DC12V battery	DC12V battery	DC 12V/24V battery
Specialized EVAP Mode							✔

Merkmale:

1. [Wide Range of Applications]: For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats. Suitable for all car models.

2.[Powerful and Easy to Operate ] :The AUTOOL SDT 206 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales. Simply connect the detector with the DC12V battery, it can output thick smoke within 30s after turning on.

3. [Advanced Technology]: It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flowmeters for accurate data display & Independently controlled Air mode and Smoke mode.

4.[Overheating protection]: This smoke detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device.

5. [3 Years Warranty]: For damage caused by non-human factors, we promise to resend parts for free within 3 years. For any needs, you are warmly welcomed to contact us and we will get back to you ASAP within 24 hours.

Dichtigkeitstest einfach durchzuführen:   
1.Fill 10ml baby oil to the detector for the first time. Open the engine cover, and hang the detector in the cover.
2.Disconnect the pipe that needs to be connected with detector.
3.Connect detector with DC12V battery, turn on the power switch, and the detector starts to work
4.In about 30 seconds, the pipe will be filled with smoke. Check the leak points. Please use head lamp if necessary.

Vorsicht:   
1.When you use this AUTOOL SDT 206 Car Smoke Leak Detector for the first time, fill with 10ml oil . Please be careful NOT to beyond this range.
2.The testing liquid : both liquid paraffin and baby oil are OK.
3.Fresh oil can be filled with only when the smoke gets thin, and it can’t be filled over 20ml each time.
4.Before filling fresh oil, please pour out the left oil in the detector & replace the detector oil regularly.
5.During the process of leak detection, please keep away from smoke-sensitive parts.
6. Do NOT run the detector over 8 minutes continuously. It needs interval rest.
8. The detector has an intelligent protector, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power. In this case, please operate it later.
9.The round part of this detector has temperature, please be careful to avoid burns.
10. If the test pipe needs to be disconnected in the middle, please secure the other side with a rubber stopple.

Packliste:   
1pc * AUTOOL SDT 206 Car Smoke Leak Detector Main Unit 
1pc * Hook (with hand-tighten nuts)
1sets * Rubber hose plug (with serial specification)
1pc * standard cone adapter
1pc * power cord clamp 
1pc * oil bottle(oil not included) 
1pc*EVAP special connector
1pc*smoke hose
1pc* Universal Airbag Adapter
1pc * User manual

Beschreibung zu SDT203:

1. SDT203 smoke tester is a professional test vehicle pipeline and fuel pipeline leakage. One of the advantages of the fog machine is that it is light and portable.
2. It can help us quickly and accurately locate the leakage of cars and motorcycles on the pipeline system within a few minutes.
3. There is only 2.5KG and a rope on the side of the machine. You can take it anywhere.
4. By observing the pressure gauge, the leakage situation is clear at a glance.
5.It supports air Intake System Test, Exhaust Systems Test, Cooling System Test, Car Sealing Test, Fuel Tank System Test, Various Pipe Fittings Test.
6.This Automotive Diagnostic Leak Detector is designed for testing leaks in vehicle pipe systems.
7.It could be used on all cars, motorcycles, snowmobiles, ATV, light trucks, boats, etc.

Technische Daten:   
●Power Supply: 12V Vehicle Battery, <8Amp
●Output Pressure: <1.2bar
●Flow Rate: <7L/Min
●Length of Smoke Hose: 2.5Meters
●Length of Power Cord: 2.5Meters
●Working Cycle: 5 Min auto-stop

Merkmale:   
1.Suitable for all car models. For detecting the leakage of pipe systems on cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
2.The AUTOOL SDT 203 has its own Air Pump without relying on other machines and Pressure Gauge with precise scales.
3.It works on the EVAP system. (Provided with another version that specially designed for EVAP system). Equipped with dual flow meters for accurate data display & Independently controlled Air mode and Smoke mode.
4.Overheat & Anti-frost Protection, if it exceeds the working limit, such as over 75 ℃, it will automatically turn off the power to secure the safety of both the operator and device.
5.3 Years Warranty.

 

AUTOOL SDT205 is a professional automotive pipe leak detection tool. Diagnostic leak detectors can use as a visual smoke system in any containment system to quickly locate hard-to-find leaks, It smoke output value is 6l/min, a lot of smoke will be emitted within 30 seconds after turning on the power, helping technicians quickly resolve problems, avoiding repeated vehicle repairs, and reducing diagnosis time to improve customer service.

 

Merkmale:   

1. Widely application: Used to detect leaks in pipeline systems on cars, motorcycles, snowmobiles, off-road vehicles, all-terrain vehicles, light trucks and speedboats, suitable for all models

 

2. Smoke generator technology: the smoke is stable, the output is large, and does not affect the electronic devices on the car;

 

3. Conveniently: Connect the positive and negative poles of the power cord to the car battery, a lot of smoke will be emitted within 30 seconds after turning on the power

 

4. Intelligent protection system: the power supply will be turned off automatically when the working temperature exceeds 75℃ to keep safe;

 

5. 3 years warranty.

 

Hauptfunktion:

Detect EVAP systems, intake systems, exhaust systems, wind and water leaks, charge air coolers, turbochargers, pipes, fittings, hoses and many other components.

 

Produktinformation:

Power: DC12V, vehicle battery
Smoke output value: 6l/min
Built-in air supply
Technical indicators and working environment:
Power supply: DC12V±2
Output pressure: 15psi, ≈1kg/c㎡
Output smoke: 1-6L/min
Dimensions: 350x235x300mm
Whole machine weight: 5.5kgs
Ambient temperature: -10℃~+40℃
Relative humidity: <85%
Open flames are strictly prohibited within 2m

 

Einfach zu bedienen:
1.Fill 20ml test oil to the detector.
2.Disconnect the pipe that needs to be connected with detector.
3.Connect detector with DC12V battery: red with positive, black with negative. Device starts to work.
4.the pipe will be filled with smoke. Check the leak points.

 

Cautions：
1.When you use this detector the first time, please fill 20ml oil, not beyond this range.
2.New oil can be filled with only when the smoke is light,and it can’t be filled over 15ml every time.
3.Before filling new oil, please pour out the remaining oil in the detector.
4.Please replace the detector oil regularly.

Instandhaltung :

• After the test, remove and clean the accessories. Then put them back into the box.
• Drain the test oil out and pour it back into the oil bottle.
• Clean the main unit and check if there is any fault, loose connection or damage.
• After the installation of the main unit and the accessories, please keep them in a cool, dry and dust-free place.
• Smoke and oil will oxidize and deteriorate after being in high temperature for a long time, which will affect the service life of
• the smoke generator. Please change the test oil regularly.

Packliste:   

• Main unit: × 1
• Smoke hose: × 1
• EVAP tool kit: × 1
• Standard cone adapter: × 8
• Plug cone adapter: × 1
• Inflatable bladder: × 1
• Power cord: × 1
• Smoke fluid filling bottle(oil not included): × 1
• User manual: × 1
• Certificate of conformity: × 1

 

 

Beschreibung zu SDT205s:

 

 

Beschreibung zu SDT202:

 

Beschreibung zu SDT106: