eBay

Precautions:
1. Before application, first confirm whether your motor's working voltage, current, and speed are consistent with the control board
2. Be sure to confirm whether the polarity of the power supply is correct before turning on the power, and whether there is a short circuit in the connected wires, etc.
3. From start to running of the motor, if the heat is serious, the current exceeds the normal value, and the speed does not go up, you need to stop the acceleration immediately and disconnect the power supply

Troubleshooting:
1. The motor cannot start normally: please check whether the power supply is normal, whether the related wiring of the motor is correct, whether the speed regulation voltage is normal, and whether the enable terminal is high (the enable terminal should be 5V in normal use, and 0V when disabled)
2. The Hall phase sequence does not match the motor winding, adjust the three Hall wires until the motor runs smoothly

JYQD_V7.0 can directly drive DC brushless motors with diameters of 20, 28, 32, 45, 50, 57, etc., and JYQD_V7.0 brushless DC motor control boards, except for the connectors, are all produced by SMT technology, with small size Simple application and convenient operation. In the most typical applications, only need to connect the motor and power supply to work normally

1. Connect the power supply and motor wires:
Connect the motor winding wires (3 pieces) and the power wire according to the signs on the drive board (see picture)
2. Connect the Hall line:
According to the hall line mark on the motor, connect it to the hall connection terminal on JYQD_V7.0 (see picture)
3. Connect to the control terminal:
From speed control, forward and reverse rotation, enable, connect the speed control potentiometer, forward and reverse switch, and enable switch as shown in the figure (see figure)
4. After the first 1/2/3 three-step operation, you can power-on test (run). Before power-on, you must pay attention that the power supply voltage is consistent. The motor should start from a stopped state and be able to run in a balanced manner
6.SC enable terminal:
When not using this function, it can be connected to 5V or left floating

Specification:
Working voltage: 24V
Working current: <3A
Enable function: Yes
Speed control function: Yes
Power indicator: green light
Running indicator: red light
Overcurrent protection: Yes

Package list:
1X 24V DC brushless Hall motor motor drive board adjustable speed and reversible control module hardware without program

Shipping Policy
Item Location
Payment Mathord
Returns Policy
About Feedback

Shipping Policy

1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 30 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.

Item Location

ShenZhen

Payment Mathord

1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment

Returns Policy

1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond

About Feedback

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!

Feature Products