You may also like
12V/24V MPPT/PWM 2-in-1 Solar Charge Controller Solar Panel Battery Intelligent Regulator with Dual USB Port and LCD Display 10A/20A/30A/40A/50A/60A/100A
Description:
The solar charge controller is suitable for solar green light, solar light box, advertisement board, solar insecticidal lamp, house solar power generation system, marine solar power generation system and outdoor living solar power generation system.
Features:
Real-time display of temperature, charging current and discharge current.
Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking.
Charge 12V /24V lithium battery, super wide charge and discharge adjustable.
The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available).
Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery.
Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat.
R5.0 solar charging DC plug, R5.0 DC lamp output DC plug, easy to connect.
Specifications:
Name: LCD Solar Controller
Main color: black
Main material: ABS
Voltage: DC 12V / 24V
Rated current: 10A/20A/30A40A/50A/60A/100A (optional)
Maximum photovoltaic voltage: 50V
Display: LCD screen
Self-consumption: <10MA
Overcharge protection: 14.4V / 28.8V
Overcharge Float charge: 13.7V / 27.4V
Charge recovery voltage: 12.6V / 25.2V
Over discharge protection: 10.7V / 21.4V
Over discharge recovery: 12.6V / 25.2V
Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.)
Working temperature: -35 ℃ -60 ℃
12V fits 18V solar panel, 24V fits 36V solar panel
Product size: about 150 * 78 * 35mm / 5.9 * 3.1 * 1.4in
Product weight: about 155 g / 5.5 oz
Package size: about 200 * 100 * 90mm / 7.9 * 3.9 * 3.5 inches
Package weight: about 155 g / 5.5 oz
12.0 volt lead acid battery corresponding:
The float voltage is set to: 13.6
The recovery discharge voltage is set to: 12.6
The discharge cut-off voltage is set to: 10.7
12.8 volt lithium iron phosphate battery corresponding:
The float voltage is set to: 14.6
The recovery discharge voltage is set to: 13.6
The discharge cut-off voltage is set to: 11.0
11.1 volt lithium battery corresponding:
The float voltage is set to: 12.6
The recovery discharge voltage is set to: 11.6
The discharge cut-off voltage is set to: 9.6
Function:
1. Always keep the battery on fill voltage condition.
2. Prevent the battery from over-charging.
3. Prevent the battery from over-discharging.
4. Prevent the battery from reverse charging to solar panels during nights.
5. Reverse Polarity Protection for Battery
6. Reverse Polarity Protection for Solar Panels
7. When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
8. According to the battery voltage grade, the controller can automatically set charge-off voltage, the load-off voltage, the load- restore voltage. (The parameter is default under 25℃
condition, locked by the CPU procedure, cannot adjust.)
9. The controller will automatically compensate the temperature of the charging voltage according to the changes of ambient temperature.
10. Thunder protection
Packing List:
1 x Solar Panels Battery Charge Controller
1 x User Manual
You may also like
On 03-Nov-21 at 11:01:20 GMT, seller added the following information: