Logo

Dream GPS WiFi 1080p FPV Camera Drone w/ Brushless Motor & 2 Axis Gimbal

Powerful Brushless Motors & Gimbal provides smooth video

Product Details

Dream GPS WiFi 1080p FPV Drone with Brushless Motor & 2 Axis Gimbal - powerful Brushless Motors & Gimbal provides smooth video

Complete with Remote controller for long range control.

The Dream RC GPS WiFi 1080p FPV Drone  is a great low cost alternative to a DJI Spark Drone. At a fraction of the price of the Spark Drone, the Dream drone shares most of the Spark Drone features. It integrates a 1080p HD Camera mounted on a 2 axis brushless gimbal for smooth video recording or transmission directly to your smartphone via an APP up to 300m in range.

With its powerful GPS positioning (GPS and GLONASS) and brushless motors, it is able to hold a fixed position even in windy conditions. Also has follow me and return to home functionality; whereby the drone will return to its original take off point automatically at a press of a button or in loss of signal and low battery situations. Features two flight modes; surround mode flies around a Point of Interest and Waypoint mode allows flight at a route set.

Features:

1、Optical flow positioning system, precise hovering.

2、mini 2 AXIS mechanical gimbal(Pitch and roll)

3、1080P hd camera, 720P image transmission;

4、Follow mode/point navigation/track navigation. (app)

5、Intelligent control: one key take-off/landing, one key return

6、Safe flight: low power return (less than 20%)/uncontrollable return.

7、App control distance: level 200-300m, height 100m.

8、Maximum flight time:15min

Size:148 X 145 X 60 mm(length*width*height)

Weight:248 g

Satellite positioning module:GPS/GLONASS

Longest suspension time:15min

Photo size:2560×1440

Video resolution:FHD: 1920×1080 30FPS

App control distance: level 200-300m, height 100m.

Hover precision:vertical: +/- 0.5 meters

level:+/- 0.1 meter (When the optical flow is positioned normally.);+/- 1.5meter

 

Contents:

Dream drone × 1

2 axis gimbal camera × 1

Remote controller x 1

Drone battery module × 1

Charging base × 1 set

Balance charger × 1

Charging cable × 1

Propeller Set x 1

Instruction Manual x 1

Specifications:
 

Aircraft

Size 148 X 145 X 60 mm (L x W x H)
Wheelbase 175mm
Weight (Battery & Propellers Included) 248g
Motor 18*12mm 1900KV
Max Ascent Speed 2m/s
Max Descent Speed 1.5m/s
Max Speed 20km/h
Max Service Ceiling Above Sea Level 3000m
Max Flight Time 15mins
Max Total Travel Distance 3km
Operating Temperature Range 0~40°
Satellite Positioning Systems GPS/GLONASS
Hover Accuracy Range Vertical: +/- 0.5 m
Horizontal: +/- 0.5 m
(when Optical flow is active): +/- 1.0m
Operating Frequency FCC: 5.150-5.250GHZ
CE: 5.150-5.250GHz
Transmitter Power (EIRP) 5.2GHz FCC:<=23dBm

Optical flow system

Optical Flow System yes
Operating Environment Surface with clear pattern and adequate lighting (lux >15)
Velocity Range ≤1.5 m/s at 6.6 ft (2 m) above ground
Altitude Range 0.5~5m

Gimbal

Controllable Range Pitch: -90°~0°
Stabilization 2-axis (pitch, roll)

Camera

Sensor 1/2.7"CMOS
Lens FOV 110° 42 mm (35 mm format equivalent)
ISO Range Video: 100 - 3200
Photo: 100 - 1600
Image Size 2560*1440
Video Recording Resolution FHD: 1920*1080
Supported File Systems FAT32 (<=32GB)
Photo JPEG
Video MP4
Supported SD Cards Micro SD Max capacity: 32GB.
Class 10 or UHS-1 rating required
Operating Temperature Range 0~40°

Live View

Mobile App C-Fly
Live View Quality 720p
FPV Transmission Distance 800m
Required Operating Systems iOS 9.0 or later Android 4.4 or later

WiFi

Operating Frequency 5G
Max Transmission Distance Horizontal: 200m
Vertical: 150m
Max Speed 20 km/h
Max Ascent Speed 2 m/s
Max Descent Speed 1 m/s

Battery

Capacity 1000 mAh
Voltage 11.4V
Battery Type LiPo 3S
Energy 10.83 Wh
Net Weight about 72g
Charging Temperature Range 5~40°
Max Power 15W

Charger

Voltage 12.6V
Rated Power 18W

Remote Controller (RTF)

Operating Frequency 5GHz
Max Transmission Distance 800m
Operating Temperature Range 0~40°
Transmitter Power (EIRP) FCC: <=26dBm
CE: <=20dBm
SRRC: <=20dBm
Operating Current/Voltage 1.5A@3.7V
Supported Mobile Device Size Thickness Supported: 6.5-8.5mm
Max length: 80mm
Port Types Micro USB
Charge USB port
Max Charging Power 5w

Battery of Remote Controller (RTF)

Capacity 2600mAh
Voltage 3.7V
Battery Type LiPo 18650 1S
Energy 9.62Wh
Net Weight about 60g
Operating Temperature Range 5~40°
 

Warranty

Note:

Please note that this is a hobby grade high-performance remote-control vehicle.

Damages incurred by crashes, impacts and misuse are not covered by warranty.

All warranty claims are assessed on a case by case basis as per our warranty terms and conditions.

By purchasing this RC vehicle, you have agreed 1-month warranty on Rechargeable Batteries and a 3-month limited warranty terms highlighted below:

 

This Remote-Control is covered by a 3-Month Limited Warranty.
Limited includes;

- 1 month warranty on Rechargeable Batteries
- 1 month for failure or mechanical and non-electronic parts (please see Wear and Tear section below)
- 3 month for major electronic components (esc, remote controller and receiver)

Warranty excludes:
- Damages incurred to the product caused by misuse or abuse of the product, i.e. high speed impacts and crashing the product
- Tampering, or modifying of product in any kind
- Use of any unapproved 3rd party accessory with product
- Poor battery maintenance - please see Battery maintenance section below.
“Wear and Tear” parts are excluded from any Warranty when product has been used; whether in, or outside any and all parameters outlined in the products’ supplied user manual.
List of “Wear and Tear” parts:
- All Gears, their respective cogs, and Motors
- Wheels, tyres, wheel assembly and drive shafts
- Chassis, and all plastic parts

PLEASE NOTE: Not all R/C toy’s come with Power Switch. To power off your product, should it not include a power switch, is to disconnect the battery from the product

Proper use of the remote controller:

  • The remote controller is a precision digital proportion control.
  • It is recommended to use precise gentle steering control.
  • The steering wheel control knob is to be operated gently. It is recommended to use 3 fingers to steer the RC Vehicle gently left to right.
  • Do not aggressively steer the control knob as this could damage the steering knob.
  • Damages caused by mis-use and mis-handling of the remote controller is not covered by warranty.

Proper Battery Maintenance include:
- Charge the battery before first time use, before or after any use, storage or use after storage
- Allow for battery to be cool to touch prior to charging
- Disconnect the battery from product when not in use. Leaving the battery connected to the product over time (when not in use) WILL damage the battery

Care
This Remote-Control is a “Hobby Grade” product, which contains internal and external parts that are replaceable by the end user.
Over a period of use, parts will “Wear & Tear”, which is common, and will require replacement.
(The “period” can vary depending on the environment the product is used)
The supplied user manual includes’ a Parts List for all internal and external Wear & Tear items, items surrounding the wheel assembly, as well as gears, that are available for purchase on our website.
Please contact us should you require a part not listed on our website.

Specifications

SKU TR3763
Model #
Barcode #
Brand C-Fly
Artist / Author
Shipping Weight 0.9500kg
Shipping Width 0.230m
Shipping Height 0.100m
Shipping Length 0.320m
Shipping Cubic 0.007360000m3
Unit Of Measure ea
Assembled Length 0.000m
Assembled Height 0.000m
Assembled Width 0.000m
Type
Format