SKU
|
SG-Airbrush-AF186-220V
|
1pc
|
AF186 Airbrush Compressor
|
1pc
|
1.8M trachea
|
1pc
|
Double airbrush holder
|
1pc
|
Instruction manual
|
2. Specifications
SKU
|
SG-Airbrush-AF186
|
Voltage
|
220V
|
Rotating speed
|
1450/1750 r.p.m
|
Noise
|
47DB
|
Horsepower
|
1.5
|
Air flow
|
20-23L/min
|
Work pressure
|
0-57PSI
|
Automatic stop
|
57PSI
|
Automatic start
|
43PSI
|
Gas tank
|
3L
|
Package weight
|
5.2kg
|
Package Size
|
31*13.5*31cm
|
3. Advantage
[Oil-free piston type] 1.5-horsepower single-piston spray gun compressor with excellent performance, can provide constant pressure, stable air supply, air flow 20-23L/min, and has the characteristics of oil-free and maintenance-free.
[Automatic stop and start function] The spray gun compressor has an automatic stop and start function, and an on-demand air supply system is installed inside. When the preset pressure is 57PSI, the compressor will automatically shut down, and when the preset pressure is 43PSI, the compressor will automatically start.
[Low noise operation] The spray gun compressor is equipped with a newly developed motor with excellent performance, which can achieve low noise operation under the same pressure. The 47DB ultra-quiet operation allows you to complete the creation with peace of mind, without fear of noise causing interference to family and friends.
[Overheat protection function] The spray gun compressor has an overheat protection function. If the temperature is too high, it will automatically cut off the power and not burn the machine. At the same time, there are 2 cooling fans inside the spray gun compressor to extend the working cycle and achieve long-term cold operation.
[Working pressure regulator] The spray gun compressor is equipped with an industrial pressure regulator with a pressure gauge to achieve precise pressure adjustment. The air pressure adjustment range: 0-57PSI, equipped with a pressure relief valve, is safer to use.
[Easy to carry] The lightweight and easy-to-carry large-flow spray gun compressor is an ideal choice for designers, modelers, artists, cake decorators, nail artists, tattoo designers and spray tanning.
[Filter] The spray gun compressor is equipped with a water trap and an air filter to provide clean and dry air.
[3L gas storage tank] Install a gas storage tank to stabilize the gas output and eliminate pulses. After the gas is cooled in the storage tank, it will reach the airbrush through the oil-water separator and the air pipe. Water is not easy to flow, and the air source is pollution-free. Increase the atmospheric pressure and spray atomization. The effect is good.
4. Technical Support
All Products from the factory will be provided for one year warranty after sales and lifetime technical support.