Performance introduction
This series of products are mainly used for measuring direction, inclination,
inclination, orientation, right angle, level, vertical angle, and mileage.
It is suitable for geological survey, mining of coal mines and non-ferrous metal mines,
military academies, etc. DQL100-G1 Mine Suspension Compass User Manual
Instrument structure
1. Bent arm bracket group
2. Round ring frame group
3. Compass box group
4. Magnetic needle group
1. The purpose of the instrument
DQL100-G1 type mine suspension compass and slope gauge form a set,
which is used as an auxiliary measuring instrument for mines. ๎The instrument is mainly used
Measure the magnetic azimuth angle of the secondary roadway in the mining
area and the mining face and the inclination angle of the compass wire edge.
2. How to use
The use of the instrument is supported and guided by the measuring rope, and is
centered and leveled by visual inspection and read. ๎ After tightening the measuring rope,
first use a grade gauge to level it or measure the inclination angle, and then hang the compass
to measure the magnetic declination. For the convenience of reading, the zero end of the dial
is aligned to the front when the compass is suspended. If the slope on the measuring track
is relatively large, which will hinder the level of the measuring rope, the step method shall
be used to measure the time in sections and try to make each section of the measuring r
ope parallel in the horizontal plane.