Product Description
VC300 introduce :
· Work with all vehicles after 1996 that are OBD II compliant (including CAN)
· Read and clear generic and manufacturer specific Diagnostic Trouble Codes (DTCs) and turn off check engine light
· Support multiple trouble code requests: generic codes, pending codes and manufacturer specific codes
· Review the emission readiness status of OBD monitors
· Determine the malfunction indicator lamp (MIL) status
· Retrieve VIN (Vehicle Identification No.) on 2002 and newer vehicles that support Mode 9
· Easy to use with one plug-in
· Free CD software with over 7000 DTC definitions
· No batteries needed-powered via detachable OBD II cable
VC300 Supported OBD-II protocols:
SAE J1850 PWM (41.6 Kbaud)
SAE J1850 VPW (10.4 Kbaud)
ISO 9141-2 (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (5 baud init, 10.4 Kbaud)
ISO14230-4 KWP (fast init, 10.4 Kbaud)
ISO15765-4 CAN (11bit ID, 500 Kbaud)
ISO15765-4 CAN (29bit ID, 500 Kbaud)
ISO15765-4 CAN (11bit ID, 250 Kbaud)
ISO15765-4 CAN (29bit ID, 250 Kbaud)
VC300 Features:
Vehicle Code Reader ELM327 OBD2 Scanner VC300 Support SAE J1850 Protocol
The Viecar VC300 code reader supports all OBD II protocols, including the newly-released Controller Area Network (CAN) protocol.
Though it is small, it is able to retrieve same information as large expensive scanners!
A small number of
gasoline vehicles (1994 and 1995 model year) are the OBD II compliant.To
verify if a 1994 or 1995 vehicle with OBD II compliant or not, check
the Vehicle Emissions Control Information (VECI) Label which is located
under the hood or by the radiator of most vehicles.
That is, if the vehicle
is OBD II compliant, the label will designate "OBD II Certified".
Additionally, Government regulations mandate that all OBD II compliant
vehicles must have a "common" sixteen-pin Data Link Connector (DLC).
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission
Control Information Label must state that the vehicle is OBD II compliant.
OBD2 Scanner Supported Car List:
VC300 Support 12V Diesel , Gasoline Car, DO NOT Support Hybrid, Electrical Car.
American (USA) cars from year 1996 to now :
for Chrysler, for Ford, for GM, for Jeep
European car cars from year 2004 to now
(if you car is Opel in 2004, 2005, 2006, please ask us first)
for Alfa Romeo, for
SAAB, for Acura, for Opel, for Audi, for Seat, for Bentley, for Skoda,
for Daewoo, for Benz, for Daihatsu, for Land Rover, for BMW, for
Vauxhall, for Volvo, for Fiat, for VW, for Ford, for Jaguar
for Skoda Superb after 2006
France cars from year 2006 to now
for Citroen, for Peugeot after 2006,
Not Support for Renault
Asian (Japanese/Korean) cars from year 2005 to now
(if your car is in 2004 2005 2006 release , please ask us first)
for KIA, for Isuzu, for Honda , for Mitsubishi, for Hyundai, for Dacia, for Lexus , for Mazda, for Subaru, for Toyota
for Nissan after 2008
for Suzuki after 2012
Not support for Ssangyong
VC300 Specifications:
Display: Backlit LCD, 2-line, 8 characters
Operating Temperature: 0 to 50 C (32 to 122 F)
Storage Temperature: -20 to 70 C (-4 to 158 F)
Power: 10.0 to 15.5 Volts provided via vehicle battery
Dimensions: Length 4.4" (113 mm) Width 2.9" (74 mm) Height 0.83" (21mm)
Weight: 281g
Package Includes:
1pc x CY300 (VC300)Auto mobile diagnostic
Tips:
1. If you can not sure
whether this unit fit for your cars , Please leave a message to tell us
your car's " maker , model & production year .
For example " for ford 2006 f150 " .
2. Due to the different
monitor and light effect, the actual color of the item might be slightly
different from the color showed on the pictures. Thank you!
3. Please allow 1-3cm measuring deviation due to manual measurement.