Dynamic parking line Camera Processing ACC 12V Sharer and Installation Guide for CAN + and CAN- for RCD330 PLUS.

https://www.youtube.com/watch?v=y_ljxXBKMAk

The Camera Built-in Dynamic Trajectory Chip. Support Trajectory Parking Line

-Installation requirements: ESP. vehicle brand must have ESP function,

For CVBS video input, such as rcd330, rcd340, Desay 187a, Desay 187B, no name 187A, no name 187B ,RCD360, RCD410, MIBⅠ ,MIBⅡ.

Not applicable to rcd510 / rns315 / rns510.

For Jetta MK5 MK6 Golf ,Polo,Jetta . Caddy, Skoda, Seat,etc. almost all VW car.

Please note that:

-The installation is very simple, even simpler than a camera without a dynamic track. Just lay the cable from the instrument panel to the trunk, install the camera, and connect the CAN+ and CAN- cable to ISO quadlock or gateway, so that the camera can receive data from the CANbus and display the dynamic track.

-No delay is required because it has a built-in delay.

-It is also suitable for MQB vehicles manufactured after 2015.

-If you have any questions, please contact me.

Features:

1) CCD Digital trajectory image sensor designed for VW MIB Stereo Original Screen , it don't need a CANBUS decode . support original steering wheel Dynamic trjectory line control . 2) Real 150 degree wide viewing angle.6 Glass Lens . 3) Installed in the Rear Trunk handle , 6m Video cable connection Stereo monitor, Reversing, the monitoring system automatically start working, you can clearly see the car Rear the situation . 3) -30 to 60 temperature range of application, The factory after the high pressure water immersion test and 12 hours on the electrical aging test, multilayer waterproof design, truly high pressure washing and immersion .