Feel rest assured your order will travel Australia Post Track & Trace Insured!

W132-02

It is more like what can’t you paint on with this amazing water-based, non-toxic automotive grade basecoat.

It is compatible with and even intermixed with illustration Colors.May be applied over Autoborne Undercoats and any solvent based basecoat ( do not mix with solvent paints )

Wicked Colors is one of the most trusted manufacturers of Water-Based automotive non-toxic / environmentally friendly paint systems.

May be applied to 95% of all work surfaces from fabrics / hats/canvas/paper/illustration boards/helmets/skate decks/surf boards/signs/full automotive and much more…..

Kit Contains 60ml each :

W302-02 – Wicked Pearl Yellow
W303-02 – Wicked Pearl Red
W306-02 – Wicked Pearl Orange
W307-02 – Wicked Pearl Plum
W360-02 – Wicked Metallic White (Fine)
W381-02 – Wicked Pearl Brite Blue 

Wicked  Colors 

Water-based, acrylic, multi-surface airbrush paints suitable for any airbrush project.

Colors cover semi-transparent - semi-opaque sprayed direct from the bottle. Extend for increased transparency.

Apply with airbrush or spray-gun.

Wicked Colors are intended for use as interior application and exterior application with a top-coat clear applied over Wicked Colors, such as UVLS Clears.

Wicked Colors are used primarily for use as an airbrush paint, and colors applied with a spray-gun. Wicked Colors can be sprayed out of the bottle, as well as most often thinned with 4011 Reducer added ~ 10% per volume.

Wicked Colors may also be mixed with 4050 UVLS Gloss Clear (recommended) or 4030 Balancing Clear to create a durable acrylic-urethane resin blend that adheres better to hard-surfaces and cures to a more durable, mar-resistant coating.

• Wicked Colors are best sprayed with an airbrush tip-sizes .3mm  to  0.5mm at 25 – 35+ psi

• Thin with 4011 Reducer for use with smaller tip-sizes and lower psi settings

•Spray-Gun: 1.2 – 1.3mm, 24 – 28 psi

• Mix with 4030 Balancing Clear for improved adhesion & durability onto plastics and other hard surfaces.

•Allow mix 10+ minutes acclimation before spraying.

Wicked Colors are suitable to hard surfaces such as helmets, surf boards, remote control, signage, musical instruments,fishing lures,squid jigs, die cast models, plastic model kits and more...

For clear coats they except any automotive 2pack , marine clears, most acrylic lacquer and enamels, epoxy dips and resin coatings.

If you are not entirely sure with your clear coat then a test panel may be advisable..

Made with lightfast pigments and an exterior-grade resin, Wicked Colors™ is a multi-surface, water-based airbrush paint suitable for any surface. Wicked Colors are transparent with a high pigment-volume, so they cover semi-opaque out-of-the bottle and may be over-reduced to create very transparent colours for detailed artwork.

Direct From Australian Importer Since 2006 airbrushmegastore