Install Cabinet Members First: 1. Using a level, place and align cabinet member into position. For Overlay Drawer Fronts, align the front of the cabinet member with the front edge of the cabinet. For Inset Drawer Fronts, setback the front of the cabinet member the thickness of the drawer front.
2. Fasten each side with two pan-head wood screws into the horizontal slots.
Install Drawer Member:
1. Align the front edge of the drawer member with the front edge of the drawer box.
2. Fasten each member with two #8 x 7/16” or #8 x 1/2" pan-head screws in the vertical slots.
Inserting Drawer:
1. Push intermediate member all the way back and pull the ball bearing retainer all the way forward to the front of the cabinet. Insert drawer member into ball bearing retainer channel and close. The drawer release lever will lock as drawer is closed.
2. If necessary, adjust the height of the drawer using the vertical slots on the drawer member; and the depth of the drawer by adjusting the horizontal slots on the cabinet member.
3. When all adjustments are complete, install an additional screw in the center hole on the cabinet and drawer member to lock the slide members in position. At least two locking screws per member are recommended for supporting heavy objects and to avoid tear-out of slide.
NOTE: Face-frame cabinets require rear face-frame brackets
WHEN SELECTING SOFT CLOSE OR REGULAR, SELECTING SOFT CLOSE MEANS SOFT CLOSING SLIDES; REGULAR SLIDES ARE NOT SOFT CLOSING
Package Include:
10 pairs of drawer slides (20 packs)
Note:
Rear mount brackets are NOT included, please purchase separately。 Screws NOT include。
Frameless Cabinets do not require Rear Brackets.
Face Frame Cabinets do require Rear Brackets to mount the slides.
Depth (Thickness): 0.5", Width: 45MM, Length: Your Selection
Solf close rails means no more slamming drawers
Full Extension 88 lb capacity 45mm Ball Bearing Side Mount;
Sold as a Set of 10 Pairs
Ships in 1 Business Day
Located in Los Angeles
Return Policy:* Buyers must contact us for refunds, exchanges, or repairs.* Buyers are responsible for shipping the order back with a tracking number.* Any returns must be accompanied by an invoice or packing slip.*The returns product must be uninstalled and can be sellable *This product is overweight, the shipping is expensive, and the buyer needs to bear the return shipping fee for returns & 50% restocking fee will be charged ,If you have any questions, please contact us first
* Customers may ask for a prepaid shipping label with the cost of that shipping
label to be deducted from the refund amount. This can only be done within the first 15 days of receipt of the order.