iShoot Lens Collar Tripod Mount Ring IS-RF100
Compatible with Canon RF 100mm f/2.8L Macro IS USM Lens
Bottom is 39mm ARCA Fit Quick Release Plate Feature
Compatible with Tripod Head & Clamp of RRS / ARCA-SWISS Fit
Features:
1. The lens collar is designed and improved based on the original model E (B), only compatible with Canon RF 100mm f/2.8L Macro IS USM, cannot be used with other lenses. Like the original factory, it supports horizontal and vertical shooting. When shooting vertically, the lens can be rotated by loosening the knob;

2. The plastic ring is made of PC material and made from precise molds; the inner wall of the ring is designed with three bumps on the surface, corresponding to three notches on the surface of the lens; the plastic ring weighs about 10g;

3. The tripod mount ring adopts a split structure, the edges and corners are polished, and the inner wall is affixed with a plastic film, will not wear lens surface when installed correctly; the locking knob has a non-slip design, released and pulled out to unlock; hollow-out weight reduction design, net weight is about 165g;

4. There should be no stickers on the lens surface installation position, if there is, remove it, otherwise it will affect the normal installation; install the plastic ring first, when installing, please align the points carefully, otherwise the plastic ring may be offset; and then install the metal tripod ring;

5. The tripod collar bottom is added 70mm long 39mm Arca fit quick release plate feature, can be used with 39mm Arca-swiss fit tripod ball head, panoramic head and clamp directly; more practical than lens collars without QR-Plate; also reserved 1/4" and 3/8" screw holes and stainless-steel anti-slip screws for fixing lens to tripod directly；

6. The lens collar IS-RF100 can be combined with clamp mount converter IS-3950PRO (Sold Separately), which can be used for fluid heads with Manfrotto structure;

7. The tripod ring is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.

8. Compatible with:
Canon RF 100mm f/2.8L Macro IS USM
Can't be used for other lenses
Package Including:
1 x iShoot Tripod Mount Ring IS-RF100
(The other items in the photos not listed here are for illustrating only, not included)

iShoot Quick Release Plate Converter Clamp Adapter IS-3950PRO
for Converting RRS / ARCA Fit Quick Release Plate
to Manfrotto / Sachtler Fit Fluid Head
Features:
1. The quick-release plate converter adopts a one-way design, about 75mm in length, about 50mm in width, about 15mm in thickness, about 35g in net weight; compatible with quick release plate of maximum width of about 39mm and other products of the same specification;

2. Compatible with fluid heads with 50mm quick release plate without T, include Manfrotto MVH500 and MVH700 series, 500/501/502/577/701 series, Sachtler ACE XL/FSB 4/FSB 6/FSB 8, etc., and other fluid head with the same structure;

3. Twist the 1/4 stainless-steel screw into the converter to fix the quick release plate. The built-in chute of the converter is about 55mm long, and sliding the bottom plate can change the center of gravity of the lens;

4. The clamp adapter is made of Aviation Aluminum, CNC precisely machined, hollow-out weight reduction design, polished and surface anodized finish. The appearance and exquisite workmanship are much better than similar products made by mold.
Package Including:
1 x iShoot Quick Release Plate Converter Clamp Adapter IS-3950PRO
(The other items in the photos not listed here are for illustrating only, not included)

Round Ultra-thin Quick Release Plate Clamp IS-JZ64II-YX
Compatible with RRS / Arca-Swiss Fit Quick Release Plate and Ball Head
Main features:
1. This IS-JZ64II-YX need to be purchased separately, not included in the tripod mount ring; it can be used with iShoot tripod mount ring of the listing;

2. Improved second-generation clamp, made of aviation Aluminum material, CNC finely machined, surface oxidation treatment, round ultra-thin design; size without knob is around 64 x 15.5mm; coaxial knob to adjust clamp opening and closing; knob rod length is around 46mm; net weight around 115g;

3. Clamp with precision scale, built-in spirit level, with 3/8" screw hole,
designed with two symmetrical 14 x 6.5mm hollowed function extension slots;

4. With Arca standard fit, cross slot design, compatible with ARCA-SWISS, KIRK, Wimberley, MARKINS, SUNWAYFOTO, kangrinpoche, BENRO, SIRUI quick release plate and ball head of Arca fit; can be used with iShoot panning head IS-QJ64II and quick release plate QS-60/QS-70/QS-80.
Package Including:
1 x Round Ultra-thin Quick Release Plate Clamp IS-JZ64II-YX
(The other items in the photos not listed here are for illustrating only, not included)