Inmarsat IsatDock Marine And Beam ISD710 Active Antenna.

Beam IsatDock Marine for Inmarsat IsatPhone Pro

Beam IsatDock MARINE is an IP54 rated intelligent docking station for the IsatPhone Pro specifically designed for maritime application. The MARINE Dock supports voice services via Bluetooth, RJ11/POTS, handsfree speakerphone or the active privacy handset. The handset is completely enclosed in the docking unit whilst still giving full access and functionality to the user.

The IsatDock MARINE supports Tracking & Alert functionality via the dedicated in-built GPS engine. Tracking messages can be pre-configured to support periodic reporting, manual position report update via button press, remote polling or the sending of an emergency alert messages all via SMS or SMS to email. The MARINE Dock also supports the installation of an external alert button that can be installed in a convenient location.

IsatDock MARINE allows the IsatPhone Pro handset to be used in a wide variety of maritime applications, the intelligent RJ11/ POTS interface enables cable runs of up to 600m to connect standard corded, cordless or DECT handsets to be used or alternatively interfaced with a PBX system presenting standard ring, busy and dial tones like a standard phone network.

The IsatPhone Pro handset, fits securely in the dock which is also key lockable, other features include phone charging, USB data port, in-built ringer and allows antenna and power to be permanently connected to the Dock ready for use.

TRACKING / ALERT MONITORING

IsatDock MARINE has an in-built GPS module that can provide simple tracking, monitoring and alert management in various applications within various types of vehicles, vessels or fixed site locations.

The GPS provides pinpoint accuracy and enables tracking worldwide. Tracking and alert messages can be sent via SMS or SMS to email.

IsatDock MARINE tracking and alert messages can be

simply sent to any tracking application.

Tracking messages can be sent from the IsatDock MARINE via the following means;

1. Periodic position reporting, preset during configuration of the terminal

2. Upon an alert being activated via the Alert button on the cradle or connected alert button

3. A current location position can be sent at any time by pressing the Track button on the front of the IsatDock MARINE

Alert/Alarm messages can be activated on the IsatDock MARINE using the two button press on the front of the cradle or alternatively an additional alert button or other trigger can be connected to the unit.

Once configured the alert system is always on and will generate an alert message to the preset destination once triggered. Alerts can be triggered to continually send until the alert is cleared either remotely or locally on the IsatDock MARINE unit.

TECHNICAL SPECIFICATIONS

AVERAGE POWER CONSUMPTION CURRENT @ 12V

AVERAGE WATTS

Power w/o IsatPhone Pro 130mA 1.6W

Standby + Charging 360mA 4.3W

Transmit + Charging 875mA 10.5W

Sleep Mode 5mA 60mW

Peak Current 3.5A 42W

PHYSICAL SPECIFICATIONS

Dimensions 270 x 189 x 101(mm)

10.6 x 7.4 x 4 (inches)

Weight - Dock 1.66kg 3.67lbs

Total Kit Weight 2.72kg 5.99lbs

ENVIRONMENT SPECIFICATIONS

Operating Range -30°C to +70°C -22°F to +158°F

Storage -35°C to +85°C -31°F to +185°F

Battery Charging Temp# 0°C to +45°C 32°F to +113°F

Humidity <= 75% RH

GPS Module (internal)

Channels 14 tracking, 51 Channel Acquiring

Update Rate 1Hz

Accuracy Position 2.5mCEP, Velocity 0.1m/s, Timing 300ns

Acquisition TTFF Cold 29sec, Hot 1sec

Sensitivity --161 dBm

Operational Limits Altitude 18000m , Velocity 515m/s

Dynamics 4G

CONNECTORS / INTERFACES

POTS/RJ11 RJ11/2-wire, 5REN @ 600m, Adjustable dial, ring, busy tone configured frequency and adaptive impedance.

Inmarsat Antenna TNC-Female

GPS Antenna SMA-Female

10-32 V DC 4-way microFit (AC/DC adator, or DC lead)

Privacy Handset Port RJ9 connector

Configuration/Data* USB Micro

Speakerphone In-built speaker and microphone

I/O Alarm/Alert

Alert button in-built Two button press

1x alarm loop Bare wire - ‘‘Normally Closed’’ loop IN to OUT

Track In-built single key press

CERTIFICATIONS

Inmarsat

FCC

CE Compliance

Electrical Safety

RoHS

IP55 Rating

Industry Canada

C-Tick

EMC compliance

Inmarsat Beam Mast / Pole Marine Active Antenna (ISD710)

The antenna connections (GSPS and GPS) are protected from the environment with its solid bracket attached to the antenna. The pole mount system is designed so that the cables can be thread through a PVC pole and then attached to the antenna directly keeping the cables and the connector protected from the environment. The ISD710 works with all of the Beam Inmarsat IsatDock’s and Oceana terminals, however MUST only be used with Beam certified ACTIVE antenna cables.

Beam ISD710 Features

• Inmarsat type approved

• High quality marine enclosure

• Active antenna

• Pole / Mast mounting

• SMA/SMA

• Omni directional