eBay

BG White Moulded Custom Grid Plate Switch Components Curved New Range

Nexus Grid Modular System

Ideal for domestic, commercial and industrial applications, and allows you to build your own module configurations with a variety of combinations and finishes.

Product Assembly

Easy to install with simple and secure ‘locate and clip’ fitting to frame.
Captive backed out terminal screws for fast installation.
No visible plastic around switches.
Interchangeable rockers provide flexibility.
Grid switches are often used in kitchens, utility rooms and dining rooms so that you have control over the various appliances all in one bespoke grid switch.
They can also be used when you require a custom made switch with 2 intermediates or a single switch alongside a dimmer.

To make up a complete grid switch you will require the following items:

Back box (surface mounded or flush mounted)
Grid yoke/ Grid Frames (These frames are for all screwed plate versions)
Front plate/ cover plate (Nexus screwed range)
Switches (labelled switches to match your appliances or plain switches)

Front Plates/ cover plate

A switch takes up one gang of a face plate. So if you require 3 switches you will need to buy a 3 Gang face plate etc. We also supply blank switches for when you only require 5 switches on a 6 gang face plate or 7 switches from an 8 gang face plate.

Grid yoke/ Grid Frames

For 1 and 2 gang face plates you will need RFR12
For 3 and 4 gang face plates you will need RFR34
For 6 and 8 gang face plates you will need 2x RFR34
For 9 and 12 gang faceplates you will need 3x RFR34

Back Boxes

For 1 and 2 gang grid switches you will need a standard single back box.
For 3 and 4 gang grid switches you will need a standard double back box.
For 6 and 8 gang you will need a special back box (please select MC503 from our drop down menu) this can be surface or flush mounted.
For 9 and 12 gang you will need a special back box (please select HGS912 from our drop down menu) this is a flush mounting back box

Switches

The writing is embossed into the switch
We have a range of labelled switches that are embossed to match your appliances.
Wide range of interchangeable modules including 20A Switches, Secret Key, Dimmer, Fuse holder, Flex Outlet, Fan Isolator, Indicator and Blank Modules.
The dimmer switches are ONLY compatible with Trailing edge LED bulbs (Not compatible with Leading edge).

Product Code	Product
R81	1 Gang Cover Plate
R82	2 Gang Cover Plate
R83	3 Gang Cover Plate
R84	4 Gang Cover Plate
R86	6 Gang Cover Plate
R88	8 Gang Cover Plate
R89	9 Gang Cover Plate
R812	12 Gang Cover Plate
RFR12	1 & 2 Gang Grid Yoke Frame
RFR34	3 & 4 Gang Grid Yoke Frame
MC503	6 & 8 Gang Grid Surface/Flush Box
HGS912	9 & 12 Gang Grid Flush Box
R12	2 Way Single Pole Switch
R13	Intermediate Switch
R14	2 Way Retractive Switch Single Pole (Press)
R12C	2 Way Single Pole Switch Centre Off
R14C	2 Way Retractive Switch Single Pole (Press) Centre Off
R30	20A Double Pole Switch
R31	20A Double Pole Switch with Neon
R12KY	2 Way Single Pole Secret Key Switch (Key included)
R30KY	20A Double Pole Secret Key Switch (Key Included)
R12EL	2 Way Single Pole Printed Secret Key Switch (Key included)
RINGR	Green Indicator Module
RINOR	Orange Indicator Module
RINRD	Red Indicator Module
RDTR	Trailing Edge Dimmer
RFUSE	Fuse Holder
RFLEX	Flex Outlet
RBLNK	Blank Switch
R15	3 Pole Fan Isolator Switch
RRHBW	Hob Switch (20A DP)
RROVW	Oven Switch (20A DP)
RRFNW	Fan Switch (20A DP)
RRWMW	Washing Machine Switch (20A DP)
RRTDW	Tumble Dryer Switch (20A DP)
RRFDW	Fridge Switch (20A DP)
RRFZW	Freezer Switch (20A DP)
RRFFW	Fridge Freezer Switch (20A DP)
RRBLW	Boiler Switch (20A DP)
RRMWW	Microwave Switch (20A DP)
RRCHW	Cooker Hood Switch (20A DP)
RRWHW	Water Heater Switch (20A DP)
RRWDISW	Waste Disposal Switch (20A DP)
RRACW	Air Conditioning Switch (20A DP)
RRDWW	Dish Washer Switch (20A DP)
RRBELLW	Bell Symbol Switch (20A DP)
RRHTW	Heater Switch (20A DP)
RRWCW	Wine Cooler Switch (20A DP)
RRWDW	Warming Drawer Switch (20A DP)
RRUPW	Unprinted Switch (20A DP)
Sample Rocker	Please leave a note at checkout with the label you require
2x Screws	M3.5 x 36mm Screws