Dolphin PPS300 Number Plate Parking Sensor Kit

The PPS300 parking sensor system is designed for an easy installation where you cannot or do not want to drill a bumper to fit parking sensors in it. Three sensors are neatly mounted into a number plate frame which helps maintain the original look of your vehicle. The sensor in the middle faces directly outwards while the sensors left and right are housed at an angle to give you full coverage of the width of your car or van.

Kit Contents

• 3 x Sensors
• 1 x Control Unit
• 1 x Buzzer
• 1 x EU Number Plate Frame
• 1 x Power Lead
• Instruction Manual

How it works

The number plate frame would replace the frame that comes on many European cars as standard or would attach to the car using the current screw holes securing the number plate. Your number plate then clips into the frame. You may then need to make one small hole behind the number plate to feed the three parking sensor cables through to inside the car or depending on your vehicle they could be routed upwards under a boot handle and into the car. As with our standard parking sensor systems the system then simply connects to the reversing light bulb for power so they come on automatically when you select reverse gear. 

The control box has a 3 stage setting to adjust the sensitivity of the sensors depending on what height they have been mounted at allowing you to fit them as low as 35cm or as high as 80cm. The PPS300 comes with a buzzer which you also mount in the boot which gives you audio beeps starting at 1.5m which will increase in frequency as you get closer to an object giving you a constant tone to stop at 30cm. Alternatively the PPS350 also has a display to give you a countdown in addition to the audio alerts.