1. The surface is titanium-plated, with anti-rust effect, the file is not easy to rust, and the whole is bright and bright
7. Superior performance: good heat dissipation, so that the workpiece surface will not heat up due to overheating, discolor or leave residual glue during grinding
3. Rubber coated handle: The handle is made of soft rubber, which is ergonomically designed and comfortable to use
4. Good toughness and high hardness: high temperature quenching treatment, fine particles, excellent anti-corrosion technology
5. The diamond particles are uniform: the diamond particles are fixed by a special production process, the adhesion, grinding degree and wear resistance are improved, the grinding precision is improved, and the file is wear-resistant and durable.
6. Boutique storage bag: Each set of files is equipped with a storage bag, which is convenient for storage
Product Specifications:
Product name: Gold titanium plated diamond file
Basic Material: Tool Steel
Product advantages: high hardness, durable, not easy to wear
Product size: 3*14cm /4*16cm / 5*18cm (optional)
File specifications: flat file*1+semi-round file*1+triangular file*1+square file*1+round file*1+pointed flat file*1 double half-round file*1+willow file*1+knife file*1 +Oval file*1
Scope of application: jade grinding, wood carving grinding, ceramic grinding, metal grinding
Grinding and polishing of all kinds of stainless steel/copper/iron/aluminum/plastic and other metal and non-metallic materials, it is a good accessory for surface grinding treatment
Instructions for use:
1. Do not file the oxide layer of the workpiece with a file. The hardness of the oxide layer is large and it is easy to damage the teeth. The oxide layer can be ground with a grinding wheel or with a chisel.
2. Use one side of the new file first, and then use the other side after the side is blunt.
3. In the process of using the file, always use a copper wire brush (or wire brush) to brush the debris embedded in the tooth groove along the direction of the tooth pattern. After use, carefully brush all the debris before storing.
4. When using the file, the speed should not be too fast, otherwise it will be easy to blunt prematurely. The best frequency of the file going back and forth is 40 times/min, and the length of the file is 2/3 of the total length of the tooth surface.
5. When using the file to file the workpiece, the file should avoid water, oil or other dirt, which will corrode the file and slip during filing.
6. Diamond files are widely used for filing hard metals, but not for filing soft metals, such as aluminum, copper, etc.
7. Do not use the file as other tools, such as: knocking, prying, pressing, twisting, pulling, topping, bumping and other operations.
8. When using the file, the force should not be too large, so as not to break or deform.
9. When storing files, there should be no collision or overlapping storage; the humidity in the storage place should not be too high, and it is required to keep dry and ventilated.
List:
Flat file*1
Half round file*1
Triangular file*1
Square file*1
Round file*1
sharp flat file*1
Double semicircle file*1
Willow file*1
Knife file*1
Oval file*1