Description:
1000w Grid Tie Inverter for Solar Panels or Battery
- working well with Battery
- with power acquisition meter(one acquisition meter can connect 5 inverters）
- Limiter sensor clamp
- woking well with sloar panels
 
PV VOC Input voltage Range (optional)
1. 26V-45V (for 24V battery)
2. 39V-62V (for 36V battery)
3. 55V-90V (for 48V battery)
4. 85V-130V (for 72V battery)
5. 120V-180V(for 96V battery)
-Output Voltage : AC 110V/220V (optional)
 
Features:
- Built-in Auto-limit mode
- Support RS-485 communication
- Built-in high-precision MPPT photovoltaic mode grid-connected function
- Support battery input and grid connection, battery mode power can be set
- Support battery high and low voltage protection parameter setting
- High and low voltage isolation safety design
- Full color LCD built-in Chinese and English display, practical, intuitive
 
How to connect the sensor?
1.conect the RS485 cable of the AC power acquisition meter to the 485 port of the inverter.
2.Plug the connection terminal of the transmitted current sensor into the port of the collector "CT-IN" (no +-)
3.Connect the AC power supply port "AC-IN" of the collector to the same AC power supply for the load. After the connection, it will light up.
4.In the inverter LCD, enter the "battery grid connection", through the SET {Bat AutoLimit Grid} for Y
4.Connect the inverter to AC power first, then connect the battery, the inverter will automatically output the same power as the power detected by the collector.Therefore, the inverter will not have excess electricity to be sent to the grid (ie: automatic limiter function)
5.One acquisition meter can connect 5 unit grid tie inverters
This unit be used without batteries.
It can be directly connected to solar panels.

What's in Package:

1x 1000W Solar Grid Inverter
1x Power Limiter Sensor
1x AC cable 50cm
1x User Manual