In the TLM 67, an electronic circuit is used rather than a conventional output transformer. Like a transformer, the circuit ensures good common-mode rejection, effectively suppressing interference signals that affect the balanced modulation line. The microphone can operate at sound pressure levels of up to 105 dB without distortion, and has a dynamic range of 94 dB (A-weighted), without the use of the pre-attenuation switch. The pre-attenuation switch on the back of the microphone can be used to reduce transmission levels by approximately 10 dB. It should be used only when there is a risk of overloading following devices due to very high sound-pressure levels. Use of the switch does not increase the dynamic range of the microphone, but rather shifts it by 10 dB, to higher sound pressure levels. The other switch on the back of the microphone can be used to change the cutoff frequency of the built-in high-pass filter, so as to suppress the effects of impact sound and wind noise, or to compensate for the proximity effect. Elastic mounting of the capsule supplies protection from the transmission of structure-borne noise.
Features at First Glance
- Today's development of a classic
- A versatile three-pattern condenser
- Classic Neumann look with commemorative emblem
Box Contains
-
Neumann TLM 67 SET Z Studio Microphone with Shockmount and Windscreen
- Neumann TLM 67 Multi-Pattern Switchable Studio Microphone (Pearl Gray/Nickel)
- Neumann EA87 - U87 Shock Mount for U87 Microphones (Nickle)
- Neumann 3-pin XLR to XLR Microphone Cable - 25 ft
- Wooden Case
- Limited 2-Year Warranty
-
Neumann TLM 67 SET Z Studio Microphone with Shockmount and Windscreen
- Neumann TLM 67 Multi-Pattern Switchable Studio Microphone (Pearl Gray/Nickel)
- Neumann EA87 - U87 Shock Mount for U87 Microphones (Nickle)
- Neumann 3-pin XLR to XLR Microphone Cable - 25 ft
- Wooden Case
- Limited 2-Year Warranty
| Brand | Neumann |
| Form Factor | Condenser Microphone |
| Maximum SPL | Omnidirectional: 110 dB SPL Cardioid: 105 dB SPL Figure-8: 111 dB SPL Omnidirectional: 130 dB SPL Cardioid: 125 dB SPL Figure-8: 131 dB SPL |
| Model | Omnidirectional: 110 dB SPL Cardioid: 105 dB SPL Figure-8: 111 dB SPL Omnidirectional: 130 dB SPL Cardioid: 125 dB SPL Figure-8: 131 dB SPL |
| Polar Pattern | Cardioid, Figure-8, Omnidirectional |
| Operating Principle | Pressure Gradient |
| Capsule | Condenser |
| Pattern Selection | Switched |
| Frequency Range | 20 Hz to 20 kHz |
| Impedance | 50 Ohms |
| Load Impedance | 1000 Ohms |
| Sensitivity | Omnidirectional: 10 mV/Pa at 1 kHz into 1 Kilohms Cardioid: 18 mV/Pa at 1 kHz into 1 Kilohms Figure-8: 9 mV/Pa at 1 kHz into 1 Kilohms |
| Signal-to-Noise Ratio | Omnidirectional: 65 dB CCIR Cardioid: 70 dB CCIR Figure-8: 64 dB CCIR Omnidirectional: 78 dB A-Weighted Cardioid: 83 dB A-Weighted Figure-8: 77 dB A-Weighted |
| Equivalent Noise Level | Omnidirectional: 29 dB CCIR Cardioid: 24 dB CCIR Figure-8: 30 dB CCIR Omnidirectional: 16 dB A-Weighted Cardioid: 11 dB A-Weighted Figure-8: 17 dB A-Weighted |
| THD | < 0.5% |
| Output Connectors | 1 x XLR 3-Pin |
| Operating Voltage | 48 V |
PayPal is our only method of payment. Your PayPal account must be a Verified PayPal account.
Selecting "Immediate Pay" is the way to go. If you select eCheck, it may take 2-8 days to clear PayPal.
Please include a phone number as UPS and our Trucking Companies require it.
We prefer to ship to a confirmed PayPal address and whether yes or no we may still contact you for additional verification.
For shipments in NY&CA, we are required to collect the appropriate sales tax.
Most purchases are shipped within 24-48 Business Hours
Items with "free shipping" are only shipped free to the 48 contiguous United States.
We supply tracking information directly to your eBay account as well as via email within 24 hours after the shipment leaves our warehouse.
Downtown Photo is proud to offer a 30 day return or exchange policy on most items for a full money back refund, excluding any shipping charges (for items which we offer free shipping, our standard shipping charges will be deducted from any refund or credit)
Returned or exchanged products must be in brand-new, mint condition. Items must be in the original, undamaged manufacturer's packaging with all packaging materials, including instruction booklets, packing inserts, and the blank warranty cards. Memory cards and any other Blister Pack items are not returnable once opened. Any merchandise missing the original Universal Product Code (UPC) cannot be returned. The manufacturer's labeled packaging must be enclosed within an additional shipping carton. Please do not place stickers or shipping labels on the original manufacturer's package.
Please be aware that we cannot accept returns on the following items unless they are shown to be defective in manufacture (as decided by the manufacturer):
- Underwater equipment (once taken underwater
- Inkjet printers (once ink cartridge/ribbon has been installed)
- Processing equipment (once used with chemicals)
- Educational DVDs, Tapes and Books once opened
- Blister-packed items once opened
- Original manufacturer software once opened
Please enclose a copy of your invoice with your return and tell us whether you would like the item to be replaced, exchanged, or refunded.
Returns can take up to 5 days in-house from the date we receive it to process. When returning an item, please make sure you use a shipper which provides you with Insurance and a tracking number. Items returned without a tracking number might take much longer to be processed.
