Model: PE150BFA

Rated power: 150W (Allowed output power range 150W-200W)

Rated current: 14A (allow working current range 12A-16A DC)

Rated voltage: 12.5V (allow working voltage range 11V-14V DC)

Starting voltage: 23000V (minimum starting voltage)

Color temperature: 5900K

Effective life: 500 hours

Working temperature: 150℃ (maximum working temperature allowed)

Applicable machine models

FUJINON EPX1000/EPX2200/EPX-2500

Can be used instead of: Y1808A, Y1808B with

Cautions.

1, the ignition position of the xenon lamp can be vertical or horizontal, horizontal ignition tilt angle of not more than 40 °, vertical ignition of the anode in the upper, cathode in the lower. Horizontal ignition should have an arc-absorbing magnetic field in the horizontal direction of the light bulb shell stable arc position to prevent the arc from drifting on.

2, do not stain the quartz bubble shell should be kept clean, before using the application of alcohol cotton wipe clean in the light.

3, the light bulb wiring must pay special attention to the positive and negative can not be reversed, thick electrode "+" end for the anode, thin electrode "a" end for the cathode, if the reverse in just a few seconds will be burned cathode.

4、Because of the high current, the contact between the lamp head box lampholder must be good, use must ensure that the contact point clean.

5, because the lamp is filled with high-pressure gas, so when loading and unloading transport, especially when hit to avoid collisions, work should be placed in a good heat dissipation cover to prevent explosions and strong light, strong ultraviolet burns skin and eyes.

6, xenon lamp must be used with a special DC power supply and trigger, DC power supply ripple coefficient shall not be greater than 7%, the working current should be within the specified range when ignited, otherwise it will affect the life of the lamp, or even destroyed.