-
KIA-1000W High Frequency Induction Heater Electromagnetic Heater Removal Bolts
Product name: high frequency heating rusty screw remover
Model: KIA-1000W
product description:
The high-frequency heating rusted screw remover KIA-1000W applies magnetic induction technology, which can heat treat automobiles, small parts of machinery, various metal parts and polyethylene. It is mainly used to heat various automobile rusted bolts, nuts, gears, Pulleys, pulleys, bearings, sensors, etc. There is no open flame, and there is no need to avoid various flammable substances such as plastics; no water cooling is required, the operation is safe, the use is simple, and it is convenient to carry.
Features:
Stable heating, easy to use outdoors and indoors. No burning, safety protection for other components, and improve work efficiency. No damage to parts near heating No damage to surrounding parts by passing heat through rubber or plastic No open flame
Principle: Using metal and non-metal heating in the electromagnetic field, a screw can be turned into a red induction heating device within 20 seconds.
No open flame heating to ensure your operation safety.
The rubber and adhesive materials can also be peeled off by heating them through the instrument accessories.
Scope of use: Screw removal of power towers, screw removal of high voltage electrical appliances, solid switch of screws, transformer screw removal, screw removal of various positions, removal of vinyl streaks without solvent or rubber, removal of hoses and AC routing, heating expansion bearings and The thinness of the belt makes it easy to install, rust and deform the screws to disassemble, and can be used in the disassembly of various industries and equipment.
This machine is not only suitable for auto repair shop, 4S shop, motorcycle repair shop, factory production line maintenance, machinery maintenance, precision instrument equipment maintenance, unit maintenance department, logistics department, hardware store, but also for tool brazing, diamond tool brazing , heat treatment of small parts, a small amount of smelting of precious metals (gold, silver, etc.), a small amount of stainless steel material smelting, etc.
Application range:
1. Removal of rusty screws and bolts of various sizes.
2. Heat treatment of automobile rusted bolts, nuts, gears, pulleys, pulleys and bearings.
3. Heat treatment of high-frequency quenching machine for hardware tools, such as vise, hammer, strong pliers, wrench.
4. Heating and dismantling of various production lines, mechanical equipment and precision instrument parts.
5. High-frequency quenching heat treatment of gear shafts of various power tools.
6. Carbide saw blades are welded with large and small teeth.
7. Silver frame, spare parts welding, annealing.
8. Welding of jewelry and watches.
9. Electronics industry: extremely fine wires, various electronic components, fine parts soldering and silver soldering.
10. Electromechanical industry: fine metal joints, silver brazed micro motors, shafts, etc. are quenched and tempered.
11. Wire industry: wire strip annealing.
12, toy industry: spring thin metal sheet tempering.
13. Tool welding: paper cutter, shoe blade quenching.
14. Various woodworking tools, such as: axe, planer and other heat treatment
15. Hydraulic components such as: the plunger of the plunger pump, the rotor of the rotor pump, the reversing shaft on various valves, the gear of the gear pump, etc. are quenched by high frequency.
16. Heat treatment of various high-frequency quenching machines for automobile and motorcycle parts, such as: crankshaft, connecting rod, piston pin, camshaft, valve, various gears in the gearbox, various forks, various spline shafts, transmission half High-frequency quenching heat treatment for shafts, various small shaft crank pins, various rocker arms, rocker arm shafts, etc.
parameter:
Working conditions:
1. Voltage: 220V
2. Rated current: 4.5A
3. Maximum output current: 150A
4. Working frequency: 50~60 Hz
5. Power: 1000W
6. Heating temperature: 800℃
7. Time required for heating to 800°C: 5-40 seconds
8. Instrument protection temperature: 80℃
Use environment range:
1. Ambient temperature -40℃~60℃
2. Relative humidity <95%RH
3. Atmospheric pressure 86KPa~100KPa
The high-end portable tool case contains:
1.1000W induction heater host;
2.2 bending coils - suitable for various types of nuts and bolts and other accessories;
3.2 30MM diameter coils
4.2 40MM diameter coils
5.2 coils with a diameter of 50mm
6. 2 flat heating induction coils
7. Instructions
Precautions:
1. This product can be instantly heated to 800 degrees, no open flame, no water cooling, and easy operation.
Packing:1PCS
Warranty period: 120 days
On May 9, 2022 at 20:54:28 PDT, seller added the following information: