1: 150W step-up constant voltage and constant current
2: Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and differential pressure)
3: Easy to install and use
4: Widely used
5: Short circuit protection: Yes (input 15A fuse)

Specification
Module name: 150W step-up constant current module
Module nature: Non-isolated boost module (BOOST)
Input voltage: 10-32V input
Input current: 16A (MAX) More than 8A please strengthen the heat dissipation
Static working current: 15mA (when 12V to 20V, the higher the output voltage, the higher the static current will increase)
Output voltage: 10-46V continuously adjustable (default output 19V)
Output current: 8A MAX More than 4A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Output constant current range: 0.3-8A
Turning light adjustment range: 0.3-8A
Output power: natural heat dissipation 90W, enhanced heat dissipation 150W
Operating temperature: -40~+85 degrees (please strengthen the heat dissipation when the ambient temperature is too high)
Operating frequency: 150KHz
Conversion efficiency: up to 95% (efficiency is related to input and output voltage, current and voltage difference)
Short circuit protection: Yes (input 15A fuse)
Input reverse connection protection: no, (if required please put diodes in series with the input)
Mounting: 4 x 3mm screws
Wiring method: terminal block free soldering output, with housing for soldering output. (V-IN for input, V-OUT for output)
Module size: length 60mm width 50mm height 20mm

Application range
1、DIY a regulated power supply, input 12V can be, output can be 12-46V/60V adjustable.
2, for your electronic equipment power supply, you can set the output value according to your system voltage.
3, as a car power supply, for your laptop, PDA or various digital products power supply. Optional high-grade thickened sanding and oxidation aluminum alloy shell, directly PK off the market ordinary car power supply or inverter, is the best choice for you like metal texture.
4、DIY a high-power laptop mobile power supply: with a high-capacity 12V lithium battery pack, so that your book can be bright wherever you go
5、Solar panel voltage stabilisation.
6、Charge the battery, lithium battery, etc.
7、Drive high power LED lights.

Operating instructions
I. Output current adjustment method.
1, adjust the CV potentiometer, according to your battery or LED, set the output voltage to the voltage value you need. Such as 10 strings of LED voltage adjustment 37V, four strings of battery adjustment 55V, etc.
2、Set the CC potentiometer counterclockwise for about 30 turns, set the output current to the minimum, connect the LEDs and adjust the CC potentiometer to the current you need. For battery charging, after discharging the battery, then connect to the output and adjust the CC to your desired current, (for charging, you must use the discharged battery to adjust to be accurate, because the more power left in the battery, the smaller the charging current.) Please do not use the short circuit way to adjust the current, the circuit structure of the booster module can not be adjusted with a short circuit way.
Second, the current adjustment method of the light: (The light function is used to indicate whether the battery is full. (Red light when charging, green light when full.) Use a fully charged battery connected to the output, and adjust the turn signal potentiometer to light up the red light.

List
1 x Boost Constant Current Module