Rover / Land Rover - USB iPhone Android integration kit
GROM-USB3 interface makes it easy to enjoy your music while driving. With plug-and play connection your mobile phone or USB stick becomes an in-car media centre. Optional Bluetooth Dongle adds hands free calling and wireless audio streaming.
|
Suitable for the following vehicles:
- Rover 75 1999-2005 (Alpine stereo)
- Rover MG 2001-2005 (Alpine stereo)
- Rover ZT 2001-2005 (Alpine stereo)
- Range Rover 2000-2004 (Alpine stereo, NO navigation)
- Land Rover Discovery 2000-2004 (Alpine stereo, NO navigation)
- Land Rover Freelander 2000-2004 (Alpine stereo, NO navigation)
- Any Rover with a stereo manufactured by Alpine
Model not listed - please contact us with your car details
Note: For Range Rover & Land Rover vehicles please check CDC port is present on back of radio. CD changer-equipped models may require BMWT harness.
Note: Some later Range Rover & Land Rover 2004 models have 10-pin connector, in that case a mod is needed. Please contact us for support.
Unsure? Download the full vehicle application guide or contact us first.
- Step 1 - remove the factory head unit (see FAQ's or video clips for further help)
- Step 2 - connect the Data Cable (Vehicle Specific Cable) into the typically empty CD changer port on the rear of the unit.
- Step 3 - plug the other end of the data cable into the GROM interface which is small enough to leave behind the stereo or ideally route into the glove box.
- Step 4 - connect your chosen accessory cables/USB cable and route to your preferred location around the drivers area.
- Step 5 - re-install head unit and enjoy.
Video Clips:
eBay's new 2017 active content policy now means we cannot show relevant product usage and installation clips, however they are still available on GROM Audios YouTube Channel
Data Cable:
Each Grom Audio kit comes with one vehicle specific cable (data cable) for connection between the interface and the car.
Most BMW-era Rovers use the RVR cable for connection into the head unit. For Range Rover, Land Rover and Sat Nav systems we recommend checking your vehicle for the appropriate connection - RVR on the head unit is not always present, therefore check to see if the CD changer has a 3 and 6 pin connector to work with the BMWT harness, if it has a single 10 pin connector a modification will be required.
Device Compatibility:
USB compatibility:
-
-
- USB port accepting USB media (stick / thumb drive / hard drive) - (64GB max)
- MP3, M4A, OGG, FLAC, AAC, WAV music supported
-
Apple compatibility via USB port:
-
-
- All iPods, iPads, iPhones (Lightning ) including 13 (requires your phones USB cable)
-
Bluetooth compatibility via Bluetooth dongle:
-
-
- Any phone with Bluetooth inc. iPhones, Android based phones, Windows phones etc.
-
Downloads:
Specifications:
- Automotive grade USB extension cable with latch-style connectors
- Operating Temperature: -40C - +85 C (-50F - 200 F)
- Operating current: ~220mA
- Standby current: ~1mA
- SN Ratio: 95dB
- DAC resolution: NA
- Distortion: < 0.01%
- Dimensions: W / H / D - 60* 73 * 20 mm
- Weight: 60g
- Enclosure: black metal
Kit Contents:
- Car stereo adapter in metal enclosure
- Vehicle specific cable #RVR
- User manual
- USB extension cable
Optional accessories and upgrades - sold separately:
- Bluetooth Dongle (BTD)
- Aux-in 3.5mm jack & female USB for charging (35UB)
GROM-USB3 interface makes it easy to enjoy your music while driving. With plug-and play connection your mobile phone or USB stick becomes an in-car media centre. Optional Bluetooth Dongle adds hands free calling and wireless audio streaming.
|
Suitable for the following vehicles:
- Rover 75 1999-2005 (Alpine stereo)
- Rover MG 2001-2005 (Alpine stereo)
- Rover ZT 2001-2005 (Alpine stereo)
- Range Rover 2000-2004 (Alpine stereo, NO navigation)
- Land Rover Discovery 2000-2004 (Alpine stereo, NO navigation)
- Land Rover Freelander 2000-2004 (Alpine stereo, NO navigation)
- Any Rover with a stereo manufactured by Alpine
Model not listed - please contact us with your car details
Note: For Range Rover & Land Rover vehicles please check CDC port is present on back of radio. CD changer-equipped models may require BMWT harness.
Note: Some later Range Rover & Land Rover 2004 models have 10-pin connector, in that case a mod is needed. Please contact us for support.
Unsure? Download the full vehicle application guide or contact us first.
- Step 1 - remove the factory head unit (see FAQ's or video clips for further help)
- Step 2 - connect the Data Cable (Vehicle Specific Cable) into the typically empty CD changer port on the rear of the unit.
- Step 3 - plug the other end of the data cable into the GROM interface which is small enough to leave behind the stereo or ideally route into the glove box.
- Step 4 - connect your chosen accessory cables/USB cable and route to your preferred location around the drivers area.
- Step 5 - re-install head unit and enjoy.
Video Clips:
eBay's new 2017 active content policy now means we cannot show relevant product usage and installation clips, however they are still available on GROM Audios YouTube Channel
Data Cable:
Each Grom Audio kit comes with one vehicle specific cable (data cable) for connection between the interface and the car.
Most BMW-era Rovers use the RVR cable for connection into the head unit. For Range Rover, Land Rover and Sat Nav systems we recommend checking your vehicle for the appropriate connection - RVR on the head unit is not always present, therefore check to see if the CD changer has a 3 and 6 pin connector to work with the BMWT harness, if it has a single 10 pin connector a modification will be required.
Device Compatibility:
USB compatibility:
-
-
- USB port accepting USB media (stick / thumb drive / hard drive) - (64GB max)
- MP3, M4A, OGG, FLAC, AAC, WAV music supported
-
Apple compatibility via USB port:
-
-
- All iPods, iPads, iPhones (Lightning ) including 13 (requires your phones USB cable)
-
Bluetooth compatibility via Bluetooth dongle:
-
-
- Any phone with Bluetooth inc. iPhones, Android based phones, Windows phones etc.
-
Downloads:
Specifications:
- Automotive grade USB extension cable with latch-style connectors
- Operating Temperature: -40C - +85 C (-50F - 200 F)
- Operating current: ~220mA
- Standby current: ~1mA
- SN Ratio: 95dB
- DAC resolution: NA
- Distortion: < 0.01%
- Dimensions: W / H / D - 60* 73 * 20 mm
- Weight: 60g
- Enclosure: black metal
Kit Contents:
- Car stereo adapter in metal enclosure
- Vehicle specific cable #RVR
- User manual
- USB extension cable
Optional accessories and upgrades - sold separately:
- Bluetooth Dongle (BTD)
- Aux-in 3.5mm jack & female USB for charging (35UB)