Features:
- It has 2 relays which can make the equipment turn or reverse, on/off and so on come true.
- Strong signal which can pass through walls, floors and doors, control receiver from any place within a reliable distance.
- The volume is small and the performance is stable and reliable, high receive sensitivity.
- It covers application ranging from like auto door, window, lifting equipment, entrance access, to security etc.
- It can learn 2272 2262 or 1527 chip with the different code wireless 433MHz remote control.
Remote control: power by battery 2X CR2016 (NOT INCLUDED)
Specification:
Working Voltage : DC 6V-30V
Input vlotage : 1~250V
Output vlotage : 1~250V
Quiescent Current : <5MA
Max current : 10A
RF frequency : 433MHz
Working temperature : -30~+80
Recieving Sensitivity : >97dbm
Amount of storage remote controls : 25 pieces
Support encoding : 1527 Leaning code/2262 fixed code
RF Operating mode : ASK superheterodyne wireless reception
Receiving range : Open space is more than 50 meters
Remote operating mode : Momentary Mode /Toggle Mode /Latched Mode
Package Included:
1 x 2CH Wireless Relay Switch
1/2/3/4 x Remote Controller
How to use:
1. Jog/Non-latched: Press one button is working /ON. Loosen your finger on the same button is stop/OFF. One channel switch need one buttons remote control.
2. Self -lock/Self-latched: Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3. Inter-lock /Latched: Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
Working Modes
You can set up in 3 modes: Momentary mode,Toggle mode and Latched mode.
Momentary mode:
Press and hold A button,this relay will work;Release A button,this relay will stop.
Toggle mode:
Press A button,the relay will work;press A button again,this relay will stop.
Latched mode:
Press A button,the relay will work;press B button again,this relay will stop,second relay will work.
How to Set up
Momentary mode:
Press learning button once,press A button once,succeed.
Toggle mode:
Press learning button twice,press A button once,succeed.
Latched mode:
Press learning button 3times,press A button once,succeed.
Clean data:
Press learning button 8times,the data will be cleaned.All remotes cannot control this receiver.
If u want to change modes,u need to clean the data first.