New Replacement Quartz Clock Movement Mechanism Motor Hand Holes 5.5mm & 3.6mm
REPLACEMENT MOVEMENT EASY ORDER SYSTEM
1 - Remove your old movement (Black box)
2 - Measure the spindle length (protruding
Gold & plastic piece) and match to the chart below
MOVEMENT SHAFT TYPE |
SILVER THREAD LENGTH |
TOTAL SHAFT LENGTH |
TOTAL SHAFT WIDTH |
Short – For clock faces up to 3mm thick |
6.7mm |
14mm |
7.6mm |
Medium – For clock faces up to 8mm thick |
11.7mm |
19.5mm |
7.6mm |
Long – For clock faces up to 12mm thick |
15mm |
22mm |
7.6mm |
Extra-long – For clock faces up to 16mm thick |
20mm |
28mm |
7.6mm |
Supersize – For clock faces up to 22mm thick |
24mm |
32mm |
7.6mm |
3 – Decide on ticking or non-ticking
4 – Fill in your information in the drop down box’s above
5 - Hangers can be removed on request
6 – Add the quantity required
7 – Then simply buy it now or add to basket to continue
Shopping
*Please note that movements are compatible with quartz
press fit hands with a shaft size for the hour hand 5.5mm and
minute hand 3.6mm, hands are not included and some existing hands may not fit, but
I do sell hands from my shop and are listed below *
- Available in 5 spindle sizes - short, medium, long extra-long & supersize
- Movement suitable with hand holes 3.6mm & 5.5mm
- Ticking - standard ticking movement
- Non ticking - second hand sweeps rather than ticks for a quieter
- Supersweep extra quiet non ticking - re-engineered to make them much quieter than the standard sweep movements
- Movement dimensions - Height 70mm ( 55mm with hanger removed ) - Width 55mm - Depth 16mm
- Mixed Movement combinations available, simply send me a message once brought with you combination ( please note that combining extra-long and Extra quiet movements with other size's will result in a £1 charge per movement and supersize £2 per movement )
- Complete with all fittings but hands are not included
- Movements suitable for hand sizes up to 130mm, high torque movements are needed for larger hands and are available from my shop
- The movement brand and shaft colour can change from the photo's attached and although the silver thread and OK888 movement is used with most orders this may change on some occasions but a compatible model will still be sent
- Without Hanger Option - Hanger can be removed if not needed, this will leave a slight scratch to the top of the movement
- ROHS approved
- Fully tested with fitting instructions