About the Part Part Number: EGV1039
SPECIFICATIONS:
Interchanges: 4F2Z9D475AA, 4F2Z9D475AF, 5F2Z9D475A
Stainless steel valve components ensure durability.
High-accuracy pressure sensor integrated into EGR valve.
Includes stainless steel gasket to ensure complete replacement.
Direct-fit replacement for ease of installation.
Additional Specifications: Terminal
.
Quantity: 6
Terminal Type: Pin
Connector Gender: Female
Terminal Gender: Male
This part generally fits Ford, Mercury vehicles & includes models such as F-150, Freestar, Monterey, Mustang with the trims of Base Convertible 2-Door, Base Coupe 2-Door, Base Mini Cargo Van 3-Door, Base Mini Cargo Van 4-Door, Base Mini Passenger Van 4-Door, Flotillera Standard Cab Pickup 2-Door, Limited Mini Passenger Van 4-Door, Luxury Mini Passenger Van 4-Door, LX Base Mini Passenger Van 4-Door, LX Plus Mini Passenger Van 4-Door, Premier Mini Passenger Van 4-Door, S Mini Passenger Van 4-Door, SE Mini Passenger Van 4-Door, SEL Mini Passenger Van 4-Door, SES Mini Passenger Van 4-Door, STX Crew Cab Pickup 4-Door, STX Extended Cab Pickup 3-Door, STX Extended Cab Pickup 4-Door, STX Standard Cab Pickup 2-Door, XL Crew Cab Pickup 4-Door, XL Extended Cab Pickup 3-Door, XL Extended Cab Pickup 4-Door, XL Standard Cab Pickup 2-Door, XLT Crew Cab Pickup 4-Door, XLT Extended Cab Pickup 3-Door, XLT Extended Cab Pickup 4-Door, XLT Standard Cab Pickup 2-Door . The engine types may include 3.9L 238Cu. In. V6 GAS OHV Naturally Aspirated, 4.2L 256Cu. In. V6 GAS OHV Naturally Aspirated, 4.2L 4200CC 256Cu. In. V6 GAS OHV Naturally Aspirated. This part fits vehicles made in the following years 2004, 2005, 2006, 2007, 2008.
The EGR valve is also called the exhaust gas recirculation valve. It is a very important and key component of the exhaust gas recirculation device.
Its function is to control the amount of exhaust gas entering the intake manifold so that a certain amount of exhaust gas flows into the intake manifold for recirculation.
The EGR valve is usually located on the right side of the intake manifold, close to the throttle body, connected to the intake manifold and exhaust manifold, and the degree of opening of the valve is controlled by the vacuum pipe to determine the amount of exhaust gas passed into the intake manifold.
When the engine is running under load, the EGR valve opens, allowing a small amount of exhaust gas to enter the intake manifold and into the combustion chamber together with the combustible mixture.
When idling, the EGR valve is closed, and almost no exhaust gas is recirculated to the engine.
1. EGR solenoid valve
Function: ECU controls the EGR solenoid valve through the duty cycle signal to reduce the back pressure of the EGR valve, thereby opening the EGR valve.
Structure: The EGR solenoid valve has three air ports. When the EGR solenoid valve is not energized, the spring presses the valve body upward, and the atmospheric valve port is closed.
At this time, the EGR solenoid valve makes the intake manifold communicate with the vacuum chamber of the EGR valve;
2. EGR valve
Function: The valve that controls the exhaust gas entering the intake pipe.
Structure: One side (lower part) of the EGR valve diaphragm is open to the atmosphere, and the other side with a spring is a vacuum chamber whose vacuum is controlled by an EGR solenoid valve.
What is the phenomenon of EGR valve broken
If the EGR valve is broken, if the exhaust gas recirculation valve is not closed tightly, part of the exhaust gas will enter the engine intake pipe through the exhaust gas recirculation valve when the engine is idling.
When the engine is idling, the amount of mixed gas is very small, and the exhaust gas entering the intake pipe will dilute the concentration of the mixed gas, which will have a significant impact on the idling operation of the engine, making the engine idling extremely unstable and even stalling.
1. The EGR is closed for a long time. At this time, it will affect the emission of the vehicle, which means that the emission may not meet the standard.
2. When the EGR is long open, the vehicle will emit black smoke, accelerate weakly, and increase fuel consumption. At this time, the EGR valve must be replaced or cleaned.
1. Inspection of EGR valve
When a vacuum of 15kPa is applied to the EGR valve, the EGR valve should be able to be opened; when no vacuum is applied, the EGR valve should be able to be completely closed.
2. Inspection of EGR solenoid valve
Measure the resistance value, it should be 33~39Ω. When the power is off, the air blowing in from the side joint of the air intake pipe should be unblocked, and the air blowing in from the air filter should be blocked. When energized, it is just the opposite of the above