MINI R56 | N18 | Cooper S | JCW | SUPERTECH Forged Pistons 10.5:1
SUPERTECH Forged Pistons are manufactured in Argentina with technology transferred from European manufacturers. All of our pistons are manufactured to ensure the highest durability while recognizing the utmost performance improvements.
Our pistons are manufactured from extruded high silicon, enhanced 4032 alloy (with additional Cu, Ni & Mg) that has low thermal expansion and features excellent wear resistance. Additionally, the inclusion of enhanced 4032 alloy offers a much higher thermal conductivity. Using this alloy our SUPERTECH Forged Pistons have withstood up to 42psi of turbo boost with alcohol, without any problems.
Depending on the type of piston we have either a 2 or 3 step forging process that yields a fine structural grain orienting the fibers in the same direction of the stress. Combine this with several heat treatments and our pistons feature an evenly distributed hardness and extremely high tensile strength. From there each Supertech piston goes through several machining steps specifically designed to ensure dimensional precision, perpendicularity and flatness of the ring grooves.
All of our pistons feature reduction grooves, honed and reamed pin bores for the most precise fit, while our wrist pins are constructed of cold extruded chrome moly steel for high strength to be used with wire clip locks
Please contact us if you are unsure if this is the correct part
Content and images © marmotorsport.com
Weight | 2 kg | Select Size | 77.00mm | 77.50mm | Part Type | Forged Pistons | Material Type | 4032 | Bore Size | 77.00mm | Compression Height | 28.70mm | Compression Ratio | 10.5:1 | Pin Size | 20.00mm | Piston Weight | 260g | Ring Layout | 1.0 / 1.2 / 2.8 | Rod Length | 138.53mm | Stroke | 85.80mm | Crown Vol | 0.00cc | Coatings | Phosphate | Skirt Style | Slipper |
---|