Passive Audio DI Box Direct Injection Box Low Noise Guitar Bass DI-2 Channel Audio Converter
Description:
Product Name:Audio Isolator
Type:Audio Isolator
Input: 1/4" connector
Balanced output: male XLR connector
Instrument input: 50K unbalanced TS jack
Parallel (Link) output: 50k unbalanced TS jack
ATT switch: input attenuation, switchable (odb, -20db, -40db)
Ground: When engaged, the chassis ground wire is detached from the XLR jack
Output: 1/4" amp (for routing the input signal to a stage amp or monitor system)
Net weight: 595g
Gross weight: 760g
Product Size:13*11.8*4.5cm
Features:
1. Compact size passive metal direct box, for converting a high-impedance, line level and unbalanced output signal to a low-impedance, microphone level and balanced input signal.
2. With 1/4'' TRS input & output jacks, and ATT switch for adjusting input attenuation(-0dB, -20dB, -40dB); two balanced male XLR output jacks, AES standard with pin-1 ground, pin-2 hot and pin-3 cold.
3. With two ground lift switch, you can fully separate input and output grounding, which can lower hum noise or ground loops.
4. Minimizing the unwanted noise, distortion, ground loops, and maintaining signal integrity, so that you can enjoy a rich and full sound.
5. Frequently be used to connect an electric guitar or electric bass to a mixing console's microphone input jack.
Package Include:
1 x Audio Isolator
Notes:
1. Due to the difference between different monitors, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement.
3. Please leaving a message before you give the bad feedback, if the products have some problems.
Thanks for your understandings.