High Precision 1μm Linear Scale DRO 2/3 Axis Digital Readout for Bridgeport Mill Lathe EDM Grind
Travel (Measureing) Length : 100/150/200/250/300....1000MM
 |
 |
 |
| HIGH RESOLUTION | MULTIFUNCTION | 9 PIN CONNECTIONS |
| 1μm (0.0001") High Precision DRO DRO must be set to completely match the linear scale accuracy. |
circumference holes processing, linear
holes processing, ARC processing, oblique processing, slope processing,
chamber processing, R function,the tool diameter compensation function, digital
filter ,radius/diameter, mm/inch etc.
|
Readout only allows TTL square wave signal input
through 9 pins connector . Pin 1 to 4 connects +5V,0V,A,B,
Pin 5-9 is blank.
|
 |
 |
 |
| DOUBLE SEAL & SIGNAL ABLE | REPEATING POSITIONING | FULL SET ACCESSORIES |
| Signal cable uses multilayer
shielded wire steel and metal shell to provide extra protection .
Deafult offer 3meters (9.84feet long) cable connecting with linear
scale. |
Sensor adopts the precision
metrology grating as the measurement standard. And the sliding parts
have excellent repeatable positioning performance. |
Full set of installation
accessories (L type cover, backplate and screws ) included inside the
linear scale , each scale equipped with some extra screws to avoid
unsccessful installation . |
| Specifications & Functions : | Applications: Milling Machine, Lathe, EDM, Grinder etc. | ||
|
Power : AC80V~260V,50~60Hz, US plug
Power consumption: 15VA
Operating temperature: 0~45℃
Storage temperature: -30~70℃
Relative humidity: Less than 90%
Readout input signal: TTL square wave
Input signal frequency: Less than 5M Hz
Resolution : 1µm (0.001mm/0.0001")
Min resolution of DRO angle :0.0001/pulse
DRO Dimensions: 11.6"X6.7"X2.56"
Linear Scale Interface: DB9(RS232)
SDM 200 sets memory, power-off memory for 10years , circumference drilling, oblique line drilling, 1/2 centering
ABS/INC,Metric and Imperial Switching (MM/INCH) ,Value Inputting
PCD function
R function
Smooth R function
The simple R function
Chambering (applicable to: Milling machine,Boring machine)
Tool compensation (for lathe)
Machining of oblique plane
Feed Rate, Rotational Speed Measurement
Calculator
|
 |
||
|
PACKAGE INCLUDED :
1pc DRO Or 1pc Linear Scale (100/150/200/250...2000MM) 1Set Installation Accessories |
|||
 |
 |
 |
 |
| 2AXIS DRO | 3AXIS DRO | 2AXIS DRO LCD SCREEN | 3AXIS DRO LCD SCREEN |
 |
|||
 |
 |
||
|
|
||
|
FAQ:
Q1 : are the length 100, 150, 200.... 1500mm travel length or total ? Answer : all are travel length Q2: if i need 250mm , 1000mm scales with 2axis digital readout, how should i do ? Answer : You can select the 250MM (10"), 1000MM (40") and 2Axis Digital Readout add in your cart, then make the payment together, we will ship them in one kit to you . Q3 : if i need a scale like 255mm , can you offer it ? Answer : 250mm is enough , its measuring range can reach up to 270mm，so you can use if you need to measure 255mm. Q4: How to switch Mill type to Lathe type ? Answer : Please contact ToAuto Team to get the video . (press 6 times after DRO powers on) Q5 : Can i cut the scales by myself ? Answer : Technically NO, it maybe unavailable after cutting. Q6: How can i change the 5μm to 1μm display ? Q7: Is it easy to install these scales and DRO? Answer : Yes . please contact ToAuto to get the video . Q8: if i only buy scales without dro, can i use it directly on my machine ? Answer : Please must check the scale pin definition (1,2,3,4,5,6,7,8,9), which is very important !!! Q9: How to switch between milling machine lathe grinding machines Answer : we can send you the video instruction, please just contact us . Q10 : How long warranty do you offer for this kind dro ? Answer : We offer TWO Years warranty . |
|||
