Welcome

Nitrogen Front Rear Shock Suspension End Cap For Can-Am Maverick X-3 , 2&4 seat

  Product Description

Features:
Replace the stock needle-style fill end caps for FOX shocks on UTV and ATV such as Polaris, Honda,Yamaha,Can AM, Kawasaki, Arctic Cat, Etc.

-Easy to service and recharge with endcaps with schrader valve. 
-Increase the nitrogen capacity of the reservoir after installation. Provide better shock performance and you don't have to service frequently.
-They are more reliable than the stock. The original needle rubber nitrogen fill port style end-caps tends to leak, thus causing the failure of your shock.
-Include schrader valve cap o-ring & reservoir end cap o-ring, prevent dirt, debris, mud, and sand from entering the shock.


Item Specifications:
Brand: NICECNC
Material: Billet 6061 billet Aluminum
Surface Finish: Black anodized
Size: Outer Diameter is 57mm (2.24”) 
Sold in pairs

NOTE: 
Please read the description carefully and make sure that this end cap will fit your UTV shock
 
Fit for Performance Series UTV shocks that uses a 2.5'' reservoir body 

Only the following shocks can be replace with our shock end caps.
There is a "stepped" internal reservoir bore in your UTV shocks, and the reservoir end-cap is designed with a "finned" lip on the end of the cap. There will be not be any re-movable allen-head screw. A small hole will exist in the center of the endcap, with a recessed rubber plug in the center. 

Package Including:
2x suspension reservoir end caps with o-rings

Fitment：
Fit for Performance Series FOX shocks or UTV shocks with a 2.5'' reservoir body  
(Such as Polaris, Honda,Yamaha,Can AM, Kawasaki, Arctic Cat, Etc)

Some Models that take the 2.5" caps as below
For Front & rear shocks 
Honda Talon 1000R & (Talon 1000X-4 Live Valve model)
Polaris Ranger XP 1000 Fox Edition XP1000,
Polaris XP1000 Turbo (2 or 4 seat), 
Can-Am Maverick X-3 , 2&4 seat

For Rear shocks 
Honda Talon1000X-4 (Non-Live Valve)

These will fit on other makes & models as well. If you are not sure the size of your shocks, you can measure the outside of the reservoir (approximately 2.6"). Free feel to contact us and we’ll help you solve the problem.
DISCLAIMER
Disclaimer: Brother2Boy parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco etc.

Payment Policy

  • For your safety and convenience,we process all payments through PayPal where all major Credit Cards are accepted (Amex, Visa, MasterCard, Discover, etc.).
  • Import duties, taxes and charges are NOT included in the item price or shipping charges. These charges are the buyer responsibility. Please check with your country customs office before buying.
  • Payment must be made within 7 days after you win the auction. Non-Paying bidders will be reported.

Shipping Policy

  • We do our best to ship it out within 1 business of receiving your order and provide tracking numbers on all orders.
  • Please note that we can only ship to addresses verified with PayPal or your credit card.
  • Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
  • Delivery time might be longer if the item(s) be inspected by customs

Return & Refund

  • All our products come with a 30-Day Return Policy. If you would like to return your item and you are within 30 days of the purchase, and it is still in its original condition, you can return the item by contacting us through eBay messaging.
  • If you are not 100% satisfied, please let us know the Detailed Problem,We will give you a 100% satisfactory solution
  • If you received an incorrect, damaged, defective, or item not as described, contact us for a partial/full refund or replacement on our cost.
  • Buyer should pay for the return shipping fee if All NON-Seller Mistake returns for refund . (E.g. you brought wrong size or wrong item).

Feedback

  • We hope to give you a positive eBay experience by working hard, and we expect to receive a positive feedback and Detailed Selling Rating (DSR) of 5 Rating in ALL of the feedback categories (Item as described, Communication, Shipping Time and Shipping and handling charges) from the buyer upon receiving the item .
  • If you are not satisfied with our items or service, please don't hesitate to contact us before you leave any Neutral/Negative feedbacks, we will always try our best for 100% customer satisfaction.
  • Communication is the best way to solve problem. leaving a negative feedback will not help us solve any problems.

About Item

  • All items sold by us are being described to the best of our abilities, as accurate as possible, and with utmost conscientiousness on our part.
  • However, to avoid any potential oversights, I respectfully request your assistance in helping us to make this a mutually satisfactory transaction by THOROUGHLY reviewing item description and photos, and asking all questions PRIOR TO BIDDING.

Customer Satisfaction

  • Do not hesitate to contact us anytime before and after your purchase, we are committed to your 100% customer satisfaction.
  • We back our commitment with superb service, 100% full money back and a customer satisfaction guarantee.
  • Our goal is to make sure you are a happy customer and pleasant shopping with us.

Visit Our Store For Best Deal! Brother2Boy Store
Features:
Replace the stock needle-style fill end caps for FOX shocks on UTV and ATV such as Polaris, Honda,Yamaha,Can AM, Kawasaki, Arctic Cat, Etc.

-Easy to service and recharge with endcaps with schrader valve. 
-Increase the nitrogen capacity of the reservoir after installation. Provide better shock performance and you don't have to service frequently.
-They are more reliable than the stock. The original needle rubber nitrogen fill port style end-caps tends to leak, thus causing the failure of your shock.
-Include schrader valve cap o-ring & reservoir end cap o-ring, prevent dirt, debris, mud, and sand from entering the shock.


Item Specifications:
Brand: NICECNC
Material: Billet 6061 billet Aluminum
Surface Finish: Black anodized
Size: Outer Diameter is 57mm (2.24”) 
Sold in pairs

NOTE: 
Please read the description carefully and make sure that this end cap will fit your UTV shock
 
Fit for Performance Series UTV shocks that uses a 2.5'' reservoir body 

Only the following shocks can be replace with our shock end caps.
There is a "stepped" internal reservoir bore in your UTV shocks, and the reservoir end-cap is designed with a "finned" lip on the end of the cap. There will be not be any re-movable allen-head screw. A small hole will exist in the center of the endcap, with a recessed rubber plug in the center. 

Package Including:
2x suspension reservoir end caps with o-rings

Fitment：
Fit for Performance Series FOX shocks or UTV shocks with a 2.5'' reservoir body  
(Such as Polaris, Honda,Yamaha,Can AM, Kawasaki, Arctic Cat, Etc)

Some Models that take the 2.5" caps as below
For Front & rear shocks 
Honda Talon 1000R & (Talon 1000X-4 Live Valve model)
Polaris Ranger XP 1000 Fox Edition XP1000,
Polaris XP1000 Turbo (2 or 4 seat), 
Can-Am Maverick X-3 , 2&4 seat

For Rear shocks 
Honda Talon1000X-4 (Non-Live Valve)

These will fit on other makes & models as well. If you are not sure the size of your shocks, you can measure the outside of the reservoir (approximately 2.6"). Free feel to contact us and we’ll help you solve the problem.
DataCaciques
ibay365