This sale is for a comboniation mix of Coax Barrels and Coax Connectors 

These barrels and connectors are specifically designed to work with each other 

~ this is a "Variation" listing. That means that that you have to select a quantity option from the drop down menu located underneath the listings title and item condition. Whatever number you select from the drop down menu is the number of connectors and barrels you will get. ~

Connector Features:
  • Brand PPC Model # EX6XLPLUS
  • The fittings sold here are name brand. The brand is called PPC and the model is EX6XLPLUS 
  • These are the most premium top of the line fittings for RG6 cables that they make. 
  • They also are the only ones approved for the major cable and satellite contractors to use during installations. 
  • This is because the vast majority of cable, satellite and internet issues and outages are the result of broken, burntout or corroded connections as a result of cheap or badly made connectors. 
  • These connectors (fittings) attached via a compression method which means it will take massive force for it to become unattached from its cable
  • They are made of top of the line materials and metals so water or moisture will not get inside and the connector will never rust or corrode. 
  • These are worth it in the long run.
  • SignalTight™ universal compression connectors can be used for both RG6 & older RG59 series cable.
  • SignalTight™ drop connectors for 6 & 59 Series cable minimize the number of self installs that become truck rolls. SignalTight™ technology enables signal transmission approaching that of a fully tightened connector, even if left loose.
  • Commonly used tools with compression fittings: Any Compression Crimper & 7/16" snap torque wrench
  • They are approved by Dish Network, Directv, Comcast, Cox, Charter, At&t and many more.
  • They fit every type of RG6 cable out there. Quad shield too!
  • Here are some more benefits of getting these over the cheaper kind : 
  • Reduced trouble calls and easily recognized operational savings
  • Improve moisture sealing between F port and the connector nut
  • Reduced vibration effects
  • All Brass Connector 360 Degree Conical Swedge Compression.
  • Longer Nut with Deeper Threads.
  • Metal Seal provides better Pull-out Resistance & Water Seal.
  • Lubricated Internal O-Ringat Mandrel Nut.
Barrel Features:

  • Coax barrels join 2 coaxial cables together
  • The barrels are Brand COMMSCOPE  Model # SVF81GA
  • They are all new, swept tested and rated to 3 Ghz
  • They are double female barrel connector 
  • Used for high frequency cable runs (Blue Barrels)
  • Also fits to wall plates if you need them to.
  • Used to join two tv/radio/satellite/cable/cctv etc...coax cables to extend their length
  • You get minimal loss from these connectors
  • Made to the proper specifications to effectively carry 1080p, 4k, high speed internet bandwidth signals
  • Same barrels the cable & satellite installers use!
  • Fits F To F Male Connectors 
  • Improved Conductivity and made to work in any weather condition. 
  • All metal construction, anti-corrosion plated 
  • For Indoor/Outdoor use for a tight weather sealed connection. 
  • Lightweight ergonomic design
  • Approved for: Dish Network, DirecTV, Comcast, Cox, AT&T, Charter, SD or HD TV
  • These are perfect to use on RG-6, RG-59 CATV, SATV, RG11 cables and many many more
Barrel Specifications
Specifications

Environmental Specifications  
Operating Temperature   -40 °C to +60 °C (-40 °F to +140 °F)
Safety Standard   CE   |   EN 60728-4   |   SCTE
   
Electrical Specifications  
Impedance   75 ohm
Operating Frequency Band   0 – 3000 MHz
Insertion Loss at Frequency Band, maximum  0.2 dB @ 0–1002 MHz   |   0.3 dB @ 1002–3000 MHz
Return Loss at Frequency Band, minimum   20 dB @ 2000–3000 MHz   |   25 dB @ 1002–2000 MHz   |   35 dB @ 0–1002 MHz
Shielding Effectiveness, minimum   120 dB
   
General Specifications  
Device Type   F81 barrel splice
Brand   HomeConnect®
    
Mechanical Specifications  
Material Type   Brass
Plating   Nickel
   
Connector Specifications
  • Bandwidth: 0 MHz to 3 GHz
  • Impedance: 75 Ohms
  • Return Loss: Minimum -30 dB to 3 GHz
  • Insertion Loss: Less than .10 dB to 3 GHz
  • Shielding Effectiveness* (dynamic): Enhanced by 25dB
  • Operating Voltage: 90 V (at 60 Hz continuous AC)
  • Operating Temperature: -40°F to +140°F ( -40°C to +60°C)
  • Cable Retention: 45 lbs (20.41 kg) minimum
  • Meets or exceeds all SCTE Specifications