Feature Products

LCR-T4 ESR Meter Transistor Tester Diode Triode Capacitance SCR Inductance

 
Features:
Using a new generation of chips, more powerful
Using 12864LCD graphic display, intuitive information, large information content
Powered by 6F22 9v battery, easy to get cheaper
2*4 test seat and SMD component test area, in-line and SMD component testing is convenient and fast
Ultra-small LCD, delicate display
Automatic identification of pin sequence, fool test
High-precision key components are used to ensure test accuracy
Ultra-low power consumption, the power consumption is only 21ma, the standby current is only 20na, and the standby time is very long.
One-touch operation, fast and labor-saving
Ultra-small size, easy to use
 
Product description:
This tester has stable performance, can automatically read accurate data, and is easy to use. It is suitable for electronic enthusiasts, electronic developers, designers, and electronic maintenance personnel. The necessary small instruments. It can measure all kinds of resistance, capacitance, inductance, diode, triode, thyristor, MOS field effect transistor; it can judge the device type, the polarity of the pin, the output HFE, the valve voltage, and the junction capacitance of the field effect transistor. It is especially suitable for transistor pairing and identification of mixed surface mount components, and it is also the best partner for amateur DIY.
Product Specifications:
Display screen: 1.4 inch 12864LCD
LCD size: 24.16mm*35.66mm
Backlight Color: White Backlight
Temperature: Operation: 0~40℃ Storage: -10~60℃
Relative humidity: non-condensing <10°C
Battery type: 6F22 / voltage 9v
Working power supply: DV=9V
Standby current: 0.02uA
Working current: typical working current 21mA
 
Main functional parameters:
1. One key to start and test, automatically identify the device type, automatically switch the range, and automatically shut down after the test.
2. The standby current is as small as 20na, and the standby power is negligible for long standby time, and the battery can be used for power supply.
3. Automatically detect PNP and NPN type bipolar transistors, N, P channel MOSFET, JFET, diode, double diode, thyristor thyristor (thyristor), triode, resistor, capacitor, capacitor ESR value.
4. Automatically detect the pin layout and give the label according to the actual sequence.
5. Measure the current amplification factor β of the bipolar transistor, the threshold voltage of the emitter junction, and the ICE leakage current.
6. Darlington transistors can be identified by high threshold voltage and high current amplification factor.
7. For bipolar transistors, MOSFET protection diode detection and forward voltage drop Uf.
8. Measure the threshold voltage Vt and gate capacitance C of the MOSFET.
9. Detect and determine the forward voltage of the emitter transistor and the magnification and base of the transistor and MOSFET protection diode.
10. Support simultaneous measurement and symbol display of two resistances. Both ends of the displayed resistance symbol are the connected tester probe numbers (1-3), and the adjustable potentiometer can also be measured
11. The resolution of resistance measurement is 0.1 ohm, and the highest measurement value is 50M ohm.
12. The highest four digits of the capacitance are displayed, and the capacitance value ranges from 25pf (8MHz clock, 50pF@1MHz clock) to 100mF. Resolution up to 1pF (@8MHz clock).
13. The equivalent series resistance (ESR) capacitance value of capacitors above 2UF can be measured with a resolution of 0.01 ohms and a two-digit value displayed.
14. It is possible to display the symbol of the correct direction for both diodes and to display the forward voltage drop.
15. The LED is detected as a diode, it will flash several times continuously during the test, and the double light-emitting diode is detected as a double diode.
16. Zener diodes can be tested, if the reverse breakdown voltage is lower than 4.5V it will show as two diodes.
17. The capacitance value of the reverse of a single diode can be measured. Bipolar transistors can also be measured. At this time, the base and collector or emitter must be connected.
18. Only one measurement is needed to find out the connection of the full bridge.
19. The maximum capacitance test is 1000000uf, and the best test range is 0.2nF~7000uF.
20. The inductance test range is: 0.01mH~20H, more than 20H, resistance below 2100 ohms will be recognized as inductance, the measurement result only shows a single inductance, and the inductance value is displayed.
21. The test time is about two seconds, and the measurement time of bulk capacitance and inductance will be extended with the actual value.
22. Automatically shut down, after the test, the test result will always be displayed for about 25 seconds, and then shut down.
23. Be sure to discharge the capacitor before testing the capacitor, otherwise the tester will be burned.
24. Types of power devices and amplifiers, transformers, etc. are not allowed to be tested or cannot be tested.
 
Kind tips:
Tear off the screen protector before use for a better display!
Discharge before use! Be sure to discharge the capacitor before the capacitor test, otherwise there will be a danger of burning the machine, and the damage will be at your own risk!
Contrast adjustment method:
After the test result is displayed on the screen, double-click the button to adjust the number displayed in the center of the screen. At this time, single-press the button, the corresponding value will increase, and double-click to save when satisfied. (The reference value is 23-28 is the best)
 
Shipping list:
Transistor Tester X1
1. We Ship to Worldwide
2. We ship your orders within 1-2 business days after the payment cleared.
3. Item shipped from China via china Post Airmail, reach most of the countries within 2 to 4 weeks.
4. Delivery time depends on destination and other factors, it may takes up to 20 days. If you don't receive
the item after 30 days,please keep in touch with us, we'll investigate and solve the delivery problem.
5. Import duties, taxes, and charges are not included in the item price or shipping cost. These charges
are the buyer's responsibility. Please check with your country's customs office to determine what these
additional costs will be prior to bidding or buying.
 
ShenZhen

1. We accept PAYPAL only.
2. Payment must be made within 7 days of auction closing (Unpaid dispute will automatically open when item
is not paid in 7 days).
3. PLEASE NOTE: SHIPPING&HANDING DOES NOT INCLUDE DUTIES, LOCATL TAXES OR ANY OTHER IMPORTATION FEES.
4. Please list your special requests (color, packages, value of declaration, etc.) in the EBAY NOTES SECTION
when you make payment

 

1. Customer satisfaction is our top goal. All products are quality checked. They are new and in good
condition when shipped to our customers. If product is defective or damage upon arrival, or wrong
product shipped, please keep in touch with us immediately. Returns accepted within 14 days of delivery date
and item must be in original new condition, not worn or altered in any way with attached tags & wrap.
Otherwise deal is final. Return shipping must be paid by buyer.
2. Please keep in touch with us first if you have anyproblems/questions/concerns. We will be happy to resolve
any issues you may have in a cordial and friendly manner.
3. We appreciate your Positive Feedback, and will do the same in return. PLEASE DO NOT leave
negative feedback without first communication with us. Please allow max 24 HOURS for us to respond

We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is
very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or
negative feedback, so that we can satisfactorily address your concerns.It is impossible to address
issues if we do not know about them!

DataCaciques