SUPERMICRO X7DBE + motherboard
Model: X7DBE+
Entrance exit:
Serial ATA
Six Serial ATA ports
Support for six SATA hard drives
A single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including a CF (Compact Flash) card
Compact Flash slot (40-pin connector, IDE 1 single channel)
Supports UDMA 5 mode, PIO 4 mode, and ATA / 100
Soft
1 floppy controller; 1.44MB, 2.88MB
LAN
2x RJ45 LAN ports
USB
2x rear USB ports
3x internal USB pins
A total of 5 USB 2.0 compliant / 1.1 compliant
VGA
1x VGA port
Keyboard mouse
PS / 2 keyboard and mouse ports
Serial port / header
1 UART 16550 high speed serial port
1 UART 16550 high speed serial interface
Parallel port
1 ECP / EEP parallel port
On-board devices:
Chipset
Intel® 5000P (Blackford) Chipset
MCH + PXH + ESB2
SATA
Intel ESB2 SATA 3.0 Gb / s controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
IPMI
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI socket (SIMLP)
(Optional: AOC-SIMLP-B (+))
(Optional: AOC-SIMLP-3 (+)) with 3rd LAN support
Network controllers
Intel® Dual Port (ESB2 / Gilgal) 82563EB Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX and 1000BASE-T, RJ45 output
Intel® I / OAT support for a fast, scalable and reliable network
Graphics
ATI ES1000 controller with 16MB video memory
Super I / O
Winbond 83627HG chip
System memory:
Memory capacity
Sixteen 240-pin DIMM sockets
Supports up to 64 GB of 667/533 MHz DDR2 ECC FB-DIMM memory
Memory bus with two branches
Memory should be filled in pairs
Memory mirroring supported
Memory type
667/533 MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
512MB, 1GB, 2GB, 4GB
Memory tension
Only 1.8V
1.5V (AMB)
Error detection
Corrects one-bit errors
Detects two-bit errors (using ECC memory)
Supports data correction of a single Intel® x4 and x8 device (SDDC)
CPU / Cache:
processor
Dual 771-pin LGA sockets
Supports up to two Intel® 64-bit Xeon® processors of the same
type below:
Quad-core Intel® processor
Xeon®
with the sequence 5400/5300
(Harpertown / Clovertown processor)
up to 3.16 GHz
Intel® Xeon® dual-core processor o
5200/5100/5000 sequence (Wolfdale processor
/ Woodcrest / Dempsey) to 3.40 GHz
NOTE: Xeon® 5100 (Woodcrest) CPUs require motherboard revision 2.0 or later
System bus 1333/1066/667 MHz
Operating system software
Supports 64-bit operating systems
Supports 32-bit operating systems
!! NO CPU !!
!! NO FRAMEWORK !!
the plate itself
REVIEW PHOTO