Zinc air test device metal air battery mold gasket seal transparent non-circulating electrolytic cell OMS-G
Transparent Die: Electrolyte Not Circulating-OMS-G Series

1. product introduction

1, using plexiglass (PMMA) as the main material, corrosion resistance, high strength, easy to observe.

2. Simple assembly and easy disassembly. Response area points 1, 2, 3, 4 and 4.5 cm2, other requirements can be customized.

3. All screws are made of 304 stainless steel. Butterfly nuts are more convenient to assemble.

4. Difference between OMS-G and OMS-T:

1) The OMS-G is sealed with gaskets, and the positive electrode material has a large compression area when the device is tightened, which can better protect the positive electrode material; there is no need to make an O-ring fixing groove on the liquid storage plate, so the liquid storage plate will be more durable, Will not collapse the liquid storage plate and the fixed groove fall off.

2) The pole spacing of the OMS-G device is about 10mm, which is smaller than the pole spacing of 14mm of the OMS-T device, and the ion transmission distance is closer. The effect is better when tested with high current and high power.

Project | Parameters
Mold material: plexiglass
Width and height: 7 * 6cm
Positive and negative distance: 1cm
Model: G1/G2/G3/G4/G4.5
Reaction area: 1/2/3/4/4.5cm2
Charge volume: 3 ~ 4ml

* G1 cathode reaction area is 1 cm2, but the reaction area on the anode/zinc electrode side is 4.5 cm2. If you need cathode and anode area correspondence, please contact customer service before placing an order.

7. Precautions

1) It is forbidden to place the plexiglass plate directly in ethanol/alcohol solution, or pour alcohol on the surface of the plexiglass plate, otherwise it will cause cracking or even damage to the surface of the plexiglass plate. When there is oil stain on the surface of the plexiglass plate, it is recommended to clean the surface with a small amount of alcohol dipped in paper towel.

2) It is forbidden to use ultrasonic cleaning for plexiglass plates!

Packing：1PC
Warranty period: 120 days