eBay

Lot of 3, Brand new axial SuperTech electrolytic RoHs general purpose 105 Deg tolerant capacitors. Our selection is from 10uF to 10,000uF and these have 16V to 450V DC operating voltage and are 20% tolerance parts. You will get three identical SuperTech capacitors of your chosen value at a given operating voltage.

Please Note : Diameters are between 6-22mm & lengths 13-41mm, ideal for matrix through-hole PCB's. Sizing Below.

10uF, 450V, 20%, 13x21 mm

22uF, 450V, 20%, 16x26 mm

47uF, 450V, 20%, 18x32 mm

60uF, 450V, 20%, 18x36 mm

100uF, 450V, 20%, 18x41 mm

10uF, 100V, 20%, 6x13 mm

22uF, 100V, 20%, 8x16 mm

47uF, 100V, 20%, 10x20 mm

60uF, 100V, 20%, 10x20 mm

100uF, 100V, 20%, 13x21 mm

220uF, 100V, 20%, 13x26 mm

560uF, 100V, 20%, 18x32 mm

470uF, 50V, 20%, 13x21 mm

560uF, 50V, 20%, 13x21 mm

1000uF, 50V, 20%, 16x26 mm

2200uF, 50V, 20%, 18x36 mm

3300uF, 50V, 20%, 22x41 mm

4700uF, 50V, 20%, 22x41 mm

5600uF, 50V, 20%, 22x41 mm

10000uF, 25V, 20%, 18x40 mm

1000uF, 16V, 20%, 10x20 mm

10000uF, 16V, 20%, 18x36 mm

An electrolytic capacitor is a polarized capacitor whose anode or positive plate is made of a metal that forms an insulating oxide layer through anodization. This oxide layer acts as the dielectric of the capacitor. Because of their higher capacitance values, electrolytic capacitors are most often used in lower-frequency applications such as in power supply filters. The high capacitance values typically associated with electrolytic capacitors act as shorts or low impedance lines for RF (Radio Frequency) and higher-frequency applications.