QSC DCP 100 Digital Cinema Processor Booth Monitor Crossover DSP Rackmount 

In Good Condition And In Full Working Order


Included
1 x QSC DCP 100 Digital Cinema Processor Booth Monitor Crossover DSP Rackmount 


A Cinema Processor, Booth Monitor and Digital Crossover along with network control and monitoring of DSP, amplifiers and speakers in one integrated package.
Everything you need between server and amps.
QSC's Digital Cinema Processor, the DCP 100, builds on the legacy of DCM and Basis to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. The DCP 100 offers most of the features of the DCP 300 but at a lower price point for 8-channel systems that also don’t require CobraNet™ network audio distribution.
Designed to be used with QSC's Digital Cinema Amplifiers (DCA) and featuring advanced DSP presets for QSC's Digital Cinema Speakers (DCS), the DCP 100 optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DCP 100 covers cinema systems with 3 passive or bi-amp screen channels and 2 or 4 surround channels. The DCP 100 is also compatible with analog cinema processor formats including Dolby® Digital Surround-EX and DTS-ES and features an 8-channel analog input for integration with 35 mm audio systems.

Features:
Digital Input for up to 8 Channels of audio.
Network control and monitoring via SNMP.
Serial automation control via RS-232.
Analog Inputs for film processors, non-sync and Mic/line.
Master volume and full 1/3 Octave Graphic EQ on all channels.
Booth Monitor with touch screen control for easy operation.
Digital Loudspeaker Crossovers - three passive or bi-amp screen channels.
Compatible with all existing DCA amplifiers - thousands of DCA equipped screens are ready for full network monitoring and control.
Replaces the DCM-1, DCM-10 and DCM-10D for digital projection retrofits.
Dual power supplies with load sharing for seamless operation in the event of failure.
SD Memory card for quick unit swap - restores all settings.
Multiple Bypass modes routes audio around failed components to insure that the show will go on.


Front Panel Controls
  • Power switch Rocker switch
  • Mute control Push button
  • Auditorium fader Rotary encoder
  • Monitor volume/parameter adjust Rotary encoder
  • Menu-driven LCD Touch control LCD
Rear Panel Connectors
  • D-Cinema input DB-25: AES3/EBU channels 1-8 / DB-25: AES3/EBU channels 15 & 16 (HI/VI)
  • Audio formats 5.1, 5.1 EX, 7.1 DS
  • Analog input DB-25 — Analog audio channels 1-8
  • Universal Mic/Line input XLR — Mic (+ phantom pwr) or line level
  • S/PDIF input RCA — Stereo digital audio interface and Lt/Rt Matrix
  • RCA (L/R) inputs RCA (2) — Stereo Left and Right and Lt/Rt Matrix
  • DataPort outputs HD-15 (8) — QSC amplifier interface
  • Automation inputs 6-pin Euro-style (x2) – TTL compatible dry contact closure
  • Serial Control DB-9 RS-232 serial interface
  • Logic output 4-pin Euro-style (x2) – outbound control
  • Relay outputs 6-pin Euro-style (x2) – outbound control
  • USB port Config and management interface
  • QSControl and SNMP RJ45 10/100 Mbps network management
  • SD card receptacle Configuration memory card (1 GB min)
H.I. and V.I. impaired outputs
  • Output stage type Single ended (balanced Z)
  • Output impedance 50 Ohms
  • Nominal output level -11.8 dBu (200 mVrms)
  • Loading requirements Rmin = 2k Ohms, Cmax = 4nF

QSControl™ network/ SNMP
  • Protocol Standard TCP/IP implementation over Ethernet or Fast Ethernet
  • Data rate 10/100 Mbps
  • Connection requirements Cat-5 UTP cable or better (100m max length) / Direct connection to wired network switch ports only / Dedicated LAN or VLAN
  • Dimensions (H/W/D): 5.25" x 19" x 15.2" (133 mm x 483 mm x 386 mm)
  • Line voltage requirements 100 VAC – 240 VAC, 50/60 Hz
  • Weight 16.6 lb (7.5 kg)



VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED

£900 ex VAT
 
VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK



SL 288432