Functions:
Note: The remote control can be used without scrolling code. Because the rolling code is a chip with a confidentiality agreement.
The latest IC programming code to prevent accidental removal.
4-channel radio controller for cars, roofs, garage doors, gates, alarm systems, heating systems, home automation, etc.
This is a fixed frequency remote 433MHz, used to copy 99.99% common fixed and learning codes remotely.
Clone up to 2 remote control signals from 2 different remote controls.
The remote control has a wide range of uses, mainly used for remote control of electric retractable doors, elevators, remote control railings, remote control rolling doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control passenger doors, anti-theft alarms, electric door alarms , MP3 motorcycle anti-theft alarm, etc.
Specifications:
Product name: Copy remote control
Material: plastic, alloy
Size: 5.4×2.9×1.4 (cm)
Working voltage: DC12V (built-in 27A12V battery)
Working current: 10mA
Radiation power: 10mw
Transmission frequency: 433MHZ
Transmission distance: 50-100M (in open areas, the sensitivity of the receiving device is negative 100dbm)
Encoder type: fixed encoding. Learn the code
Package List: 1 x copy remote control
How to program?
1. Delete the historical code of the copy machine.
Press the A and B buttons continuously until the LED flashes 3 times.
Leave the B button (press and hold the A button), press the B button 3 times slowly, the LED flashes.
Leave the A key to clear the code gap.
If the clear code is correct, please short press any key. The light will not flash.
If the indicator light is flashing, the release process of short pressing any button is wrong. Please try the sharing process again.
2. Copy the code from the original station.
Place the cloned remote control and the original remote control side by side. Make sure they are touching.
Press and hold a button on the original remote control and a button on the clone remote control until the remote control continues to flash on the clone LED.
The blue LED will blink 3 times quickly, then stop for one second, and then blink steadily.
Release the two buttons.
The programming is successful.
Note: The remote control can be used without scrolling code. Because the rolling code is a chip with a confidentiality agreement.
The latest IC programming code to prevent accidental removal.
4-channel radio controller for cars, roofs, garage doors, gates, alarm systems, heating systems, home automation, etc.
This is a fixed frequency remote 433MHz, used to copy 99.99% common fixed and learning codes remotely.
Clone up to 2 remote control signals from 2 different remote controls.
The remote control has a wide range of uses, mainly used for remote control of electric retractable doors, elevators, remote control railings, remote control rolling doors, garage doors, sliding doors, remote control LED lights, remote control fireworks igniters, remote control passenger doors, anti-theft alarms, electric door alarms , MP3 motorcycle anti-theft alarm, etc.
Specifications:
Product name: Copy remote control
Material: plastic, alloy
Size: 5.4×2.9×1.4 (cm)
Working voltage: DC12V (built-in 27A12V battery)
Working current: 10mA
Radiation power: 10mw
Transmission frequency: 433MHZ
Transmission distance: 50-100M (in open areas, the sensitivity of the receiving device is negative 100dbm)
Encoder type: fixed encoding. Learn the code
Package List: 1 x copy remote control
How to program?
1. Delete the historical code of the copy machine.
Press the A and B buttons continuously until the LED flashes 3 times.
Leave the B button (press and hold the A button), press the B button 3 times slowly, the LED flashes.
Leave the A key to clear the code gap.
If the clear code is correct, please short press any key. The light will not flash.
If the indicator light is flashing, the release process of short pressing any button is wrong. Please try the sharing process again.
2. Copy the code from the original station.
Place the cloned remote control and the original remote control side by side. Make sure they are touching.
Press and hold a button on the original remote control and a button on the clone remote control until the remote control continues to flash on the clone LED.
The blue LED will blink 3 times quickly, then stop for one second, and then blink steadily.
Release the two buttons.
The programming is successful.
Copy the other buttons in the same way.
Only suitable for fixed code keys of 433HMZ, not suitable for encrypted codes or scrolling codes.
