Product description

Material:The filter is made of iron.Anti-oxidation/corrosion.Long service life.

Features:10 micron filters are over 90% efficiency at removing particles as small as 10 microns.10 micron filters are recommended to protect sensitive inboard,sterndrive and outboard fuel injection systems.

Usage:Designed to trap the smallest particles and emulsified water from diesel.

Function:It contributes to clear contaminates protect fuel system.Well sealed.Perfect water fuel separating performance.

Water separating canister:High performance 3/8 NPT ports offer lower pressure drop rates.

Replaces Mercury 35-60494-1 and Universal.

 

To replace element:

1.Drain the unit by loosen the drain screw.

2.Loosen and remove the filter element.

3.Loosen and remove the bowl from filter element.Please attention the bowl is reusable,do not dispose unless broken.

4.Wipe O-ring gland clean,and coat bowl's seal O-ring with fresh oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.

5.Coat filter element's seal O-ring with fresh oil or grease and attach filter element onto filter head,and the tighten securely by tool.

6.Run engine and check for fuel leakage.

 

Instructions

To Drain Water:

1.Loosen drain screw to drain bowl of water.

2.Tighten drain screw.

3.Run engine and check for fuel leakage.

4.Check and replace regularly.

 

Safety Warning:

Periodically check fittings and filter element for leakage.Be careful when changed fuel filter element.Diesel is extremely flammable and highly explosive under certain conditions.Avoid spilling diesel.Always stop engine and do not smoke or allow open flames in the area while changing filter element.