CONNECTORS:
Main 20+4Pin
(2) 12V 4-Pin
(4) Molex 4-Pin
(3) Serial-ATA
(1) FDD 4-Pin
(1) PCI-E 6-Pin
Features
Complied with ATX and ATX12V standard
Active Power Factor Correction (PFC) meet EN61000-3-2
High efficiency and reliability
Compatible with European Union Directive 2002/95/EC
(Restriction on Hazardous Substances).
Remote ON/OFF function
Internal 12V DC fan included
Noise Killer (thermal fan speed control function)
Low noise and ripple
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Complies with FCC part 15 subpart J class B 115Vac operation,
and CISPR 22 class B at 230Vac operation
Approved by CUL/UL60950-1 2nd TU
Input Characteristics
Input Range: 90 ~ 264Vac (RMS), Full Range Input
Frequency: 47 ~ 63Hz
Input Current: Max 6A (RMS) @ 115Vac, 3A (RMS) @ 230Vac
Inrush Current: No damage.
Sparkle Power Inc.
A Leading Power Supply Manufacturer
Web site: www.sparklepower.com
Specification
Temperature Range: Operating: 0°C ~ +50°C; storage &
shipping: -20°C ~ +80°C
Humidity: 85% on operating, 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for
2 second
Efficiency: Typical up to 85%.
Rise time: Less than 20ms
Hold-up Time: 17ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ~ 500ms, off
delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25°C
Dimensions (LxWxH): 140x150x86mm / 5.5x5.9x3.4inch
Output Characteristics
Output Voltage Minimum Load Normal Load Maximum Load Load Reg. Ripple & Noise
+3.3V 0.1A 10.5A 21A ± 5% 50mV P-P
+5V 0.2A 7.5A 20A ± 5% 50mV P-P
+12V1 0.1A 5.5A 16A ± 5% 120mV P-P
+12V2 0.5A 4.0A 16A ± 5% 120mV P-P
-12V 0.0A 0.25A 0.5A ± 10% 120mV P-P
-5V (option) 0.0A 0.15A 0.3A ± 10% 50mV P-P
+5Vsb 0.0A 1.25A 3.0A ± 5% 50mV P-P
* +3.3V and +5V total output not exceed 130W. *-5V option.
* Total output for this subject power supply is 400W