Model No. | TB195 Encoder Transmitter |
Function discription | Encoder Transmitter modules |
Operating voltage |
3V ~ 12V DC
|
Static current |
max≤8mA(12V), min≤2mA(3V)
|
Operating frequency | 433MHz |
modulation Mode | ASK/OOK |
SAW Frequency stability | ±150kHz(max) |
Transmitter Power | 50mW (315MHz, 12V) |
Data rate | ≤10Kbps |
Antenns length | 24 cm (315 MHz), 18 cm (433.92 MHz) |
Dimension | 36 * 27mm |
Encodeing format | PT2264 fixing code (same as PT2262 SC2262 ) ,Work with PT2272 decoder IC |
Transmitter distance | 300-500M (open area) |
Technical indicators:
1.operating voltage: DC 12V ;
2.static operating current:≤6mA;
3.Working temperature :-20°C- +80°C;
4.Receive sensitivity:≥-105dBm;
7.size:74.5*54.5*27mm ;
Output:
A.singnal Inter-locking (Latch)----connect 1 and 2 ;
B.singnal Self-locking (Toggle) ---- connect 2 and 3 ;
C.singnal Non-locking (Momentary ) ---- disconnect the jumper ;
Self-lock type (Toggle): 4 chanels opens and closes independently, 4 chanels can work together ,they don’t affect each other . press A button, A relay of work and locked, press again then disconnected; Same as B C D .
Learning method and steps
1. Press any key on remote control within 5 seconds , LED flash 3 times and then turn on , then it have success in learning .
Clear the deposit information
Keep Pressing Learning Key , LED turns off , Wait 10 Seconds , LED turn on , that deposited information has been successfully cleared ;
Wiring Diagram 2:
DC 1-110V OR AC 85-265V control circuit,Wiring diagram below(Note:If not DC 12V load, need another DC 12V power supply). "LOAD" may be LED lights, fans, motors and other DC AC equipment