KW Coilover Variant 1 inox Stainless steel
drop front: 35-65mm
drop rear: ca. 50mm
Max. front axle load: -965kg
Max. rear axle load: -930kg
KW Part#: 10230008
EAN: 4250173301329
Variant: Coilover Variant 1 inox
Set consists of: Set FA coilover struts, RA springs + dampers
Height adjustable front/rear: Thread/None
Damper adjustment: None
TÜV Certification: Part certificate (§19.3)
Notes: 3
3
Only height adjustable on the front axle (threaded strut housings, springs + dampers for the rear axle)
Fits for:
Brand | Model | Type | Version | Body | Engine | Engine KW | Engine ccm | Cylinder | 4WD |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.4 16V | Schrägheck | Benzin | 55 | 1388 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.6 16V | Schrägheck | Benzin | 74 | 1596 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.8 16V | Schrägheck | Benzin | 85 | 1796 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.8 DI / TDDi | Schrägheck | Diesel | 55 | 1753 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.8 TDCi | Schrägheck | Diesel | 74 | 1753 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.8 TDCi | Schrägheck | Diesel | 85 | 1753 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 1.8 Turbo DI / TDDi | Schrägheck | Diesel | 66 | 1753 | 4 | Nein |
FORD | FOCUS DA1,DAW,DB1,DBW,DBY (DAW, DBW) (10/1998-12/2007) | DAW, DBW | 2.0 16V | Schrägheck | Benzin | 96 | 1988 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.4 16V | Stufenheck | Benzin | 55 | 1388 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.6 16V | Stufenheck | Benzin | 74 | 1596 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.8 16V | Stufenheck | Benzin | 85 | 1796 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.8 TDCi | Stufenheck | Diesel | 74 | 1753 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.8 TDCi | Stufenheck | Diesel | 85 | 1753 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.8 Turbo DI / TDDi | Stufenheck | Diesel | 55 | 1753 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 1.8 Turbo DI / TDDi | Stufenheck | Diesel | 66 | 1753 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 2.0 16V | Stufenheck | Benzin | 96 | 1988 | 4 | Nein |
FORD | FOCUS Stufenheck DFW (DFW) (02/1999-12/2007) | DFW | 2.0 | Stufenheck | Benzin | 82 | 1989 | 4 | Nein |
KW Coilover Variant 1 inox
The KW coilover kit Variant 1 “inox-line” is the ideal entry-level system for customers who want the technically lowest possible suspension setting or for those who want to customize their own. In extensive road tests, our experienced engineers developed a target group - specific setup by establishing an optimum balance of sportiness, comfort and safety and then implementing this in the series.
Setup – factory-set pre-configured damping setup
The Variant 1 "inox-line" has a vehicle-specific, fix configured damping setup with a sporty and harmonious adjustment, which allows you to experience an optimal balance of sportiness and everyday practicality. Even with full payload and maximum axle loads, the dampers always work with a sporty characteristic.
Continuously lowering
The KW Variant 1 allows a maximum or individual lowering within the tested adjustment range. Due to the dirt-resistant trapezoidal thread and the polyamide threaded ring, the continuous lowering can be varied quickly and easily, even after years.
The benchmark for coilovers
As with all KW coilovers, the engineers at KW develop in extensive test cycles on the Nürburgring Nordschleife and in our test center on the KW 7-post rig the vehicle-specific KW damper setup estimated by car enthusiasts worldwide. So you will experience your car even more directly and dynamically with a KW coilover kit. After all, you do not buy just any coilover kit, but a KW coilover kit that has been especially developed and adapted for your vehicle type. KW as manufacturer exclusively uses own resources, high-quality components and the same damper technology as high-volume manufacturers. With the KW coilover suspension Variant 1 “inox-line”, the roll and pitch movements of the vehicle body are reduced during compression, so you benefit from an unadulterated directness and a sportier handling while driving.
KW experiences for your driving pleasure
For more than 20 years, KW as manufacturer have been the market leader and innovator of individual suspension solutions for the street and racing applications. No matter where in the world, sporty drivers, automobile manufacturers and refiners rely on our KW coilovers “Made in Germany”. Every KW coilover kit undergoes extensive stress tests during production and is developed and manufactured directly in KW company headquarters in Fichtenberg in order to meet the high standards of KW quality management
customized suspension lowering
trapezoidal thread
stainless steel "inox-line"
7-post drive dynamics tested
TÜV technical component report
friction-optimized polyamide spring seat