Custom LED ELFR-1-QD Electronic LED Flasher Relay

MANUFACTURER DIRECT PURCHASE with WARRANTY!

Custom LED ELFR-1 QD Electronic LED Flasher Relay

The Custom LED ELFR-1-QD LED Flasher Relay fits many compatible motorcycles.  This eBay listing has been created specifically for the following Yamaha Motorcycles: Raider, Roadliner, Stratoliner, Warrior, V Star, Stryker, and Road Star.  The eBay Vehicle Compatibility list was populated with care.

On these motorcycles, our ELFR-1-QD will replace the OEM 5-Pin flasher relay (see instructions below) and provide the normal blink rate for LED blinkers, Incandescent blinkers, or ANY combination of the two.  Basically, regardless of what type of turn signal lamps you are using, our ELFR-1-QD will blink them at the correct speed.  

However, if you do replace the OEM flasher relay, you will lose the self-canceling turn signal feature that is part of the OEM flasher relay.  We suggest you forget about the self-cancelling because the alternative is to use power-wasting Load Equalizers (resistors) instead, and you will need one Load Equalizer for each OEM turn signal that you remove or replace with a lower power lamp or LED.  That means you could potentially spend TWICE as much money going the Load Equalizer route.  If you insist on keeping the self-canceling feature, you can find our 25 Watt Load Equalizers here.


Installation as follows on these compatible motorcycles when replacing OEM relay with our Electronic LED Flasher Relay:

  • Motorcycle Brown wire to ELFR-1 Red wire
  • Motorcycle Brown/white stripe wire to ELFR-1 Black wire
  • view picture here


(Compatible with OEM flasher Relays with Yamaha Part Numbers: 1D7-83350-00-00, 5PX-83350-00-00, 3D8-83350-00-00, 5VN-83350-10-00)