1 SET DIY EMPTY POP INK CARTRIDGES PG-275XL CLI-276XL

4x30ml Refill Ink Bottle (1 Magenta, 1 Cyan, 1 Magenta, 1 Yellow)


Instruction Included


Work with Printers: Pixma TR4720 TS3520 TS3522


No longer will you have to spend a fortune each time you run out of ink. Nor will you have to throw away a costly and perfectly usable print head when just a single color is empty. Simply pop the top off the genuine cartridge, remove the ink sponge then insert the Pop Cart refill. The Pop Cart insert contains twice the ink of a genuine cartridge and when it's empty, you simply replace it with another pop cart insert again and again. You save time, the environment and most importantly money! You can save up to 77% compared to replacing a genuine cartridge.



PLEASE NOTE: To use this product you will require a working PG-275XL, CL-276XL Standard XL OEM, Remanufatured or Generic cartridge set. The pop cart refills are inserted into empty genuine cartridges. Once empty, you simply remove the pop cart and replace it with a new refill.


Finally there is a reliable alternative for Canon printer owners who use 'all-in-one' print head cartridges. An innovative new cartridge insert has been for Canon brand printers using PG-275XL, CL-276XL cartridges.

Simply pop the top off your original Canon cartridge and slip in the Pop Cart refill.

Contains twice the ink as genuine cartridge, saving up to 77%! 


 



Please noted: Empty Pop Cartridge only suitable for original ink cartridge, not remanufactured/compatible ink cartridge (Unless the cover can be opened easily).

1. Please confirm the nozzle is working normally before installing the pop cartridge. No broken lines or color missing.

2. Turn the printer on. When you open the front cover, the cartridge holder will automatically change positions.




Press cartridge down slightly, then remove the cartridge.

3. Wrap the nozzle with tissue in case of broke the nozzle. Next, use the small knife that come with the pop cartridge to cut into the corner of the cartridge cover, then carefully and gently pry the cover off. (A slotted screwdriver would be also recommended, safer than a knife.)

4. Use the knife to trim the rough inner and outer edges of the cartridge. After trimming, pour out the scrap from the cartridge, don?t leave it inside.



Note: If the cartridge edges are not trimmed properly, the cartridge cannot be installed in the proper position, and it will affect the printing quality.


5. Remove the sponge from the cartridge.



6. Remove the rubber plug from the pop cartridge, refill the INK into the Pop cartridge, then put back the rubber plug.



Recommended ink volume to fill:
PG-240/240XL series: 26ml for BK
CL-241/241XL series: 7ml for C/M/Y
PG-245/245XL series: 20ml for BK
CL-246/246XL series: 5ml for C/M/Y


7. Take the refilled pop cartridge out of the box. Install the pop cartridge in the corresponding original cartridge container. Press down firmly.

8. Install the cartridges, the printer will automatically begin the cleaning process.

9. Print a nozzle test sheet. If the nozzle test is normal, then you can begin printing.