Complete Professional Surface Restorer Kit to Polish & Protect a badly weathered or scratched Boat, Yacht, Jetski, Narrowboat

NEW FORMULA - Developed and manufactured in the UK

Use on Boats, Yachts, Cars, Caravans, Motorhomes, Campers, Motorbikes, Gel Coats, Fibreglass & GRP Surfaces  

5 x 500ml Bottles  

For badly oxidised or scratched boats in need of complete paintwork restoration and protection.

This kit consist of 3 stages of professional specification polish to get your paintwork to the best glossy condition it can possibly be in, followed by a paint sealant that will keep it in that condition for up to 12 months - much longer lasting than wax.  Also included is a bottle of cleansing spray that ensures all contamination is removed from your paintwork between stages, allowing the sealant to achieve the best possible long lasting bond.

High Quality Finishing Compounds as used by tradesmen who need a product able to deliver that perfect finish! 

The 3 stages of polish very effectively remove heavy oxidation and scratches from paintwork, fibreglass, gel coats and GRP, restoring colour and the gloss finish.

They contain diminishing abrasive additives which means the particles of abrasive start off large, getting smaller the more you work with them. In effect lowering the cutting power over time. It also contains the highest grade of fillers and kaolin clays to help refine, restore and cleanse the vehicles paintwork

The 1st stage Super Deep Cut polish will remove heavy scratches that have not penetrated all the way through the surface finish - it can remove scratching from 1200 grade wet and dry with ease.  You can then move on to the Medium Cut and High Gloss grades in turn, improving the surface finish with each to give a perfect high gloss finish, prior to applying paint sealant.

The polishes can be used by hand or machine

Use Dry - No water is required, reducing splatter and clean up time.  Like all polishes, this is an abrasive that can cut through paint or gel coat finishes if used for too long - The Super Deep Cut in particular is an aggressive grade of polish and should be used with care

When you have finished polishing, wipe over the surface with the Perfect Finish Panel Prep Wipe, ready to apply the Paint sealant.  This forms a glossy, protective barrier with incredible water beading - the sample pictures attached are from a customer in 2022 and shows the bonnet of their 2008 Fiat Panda, you can see how fantastic it looks and how well it is beading water off.  

The paint sealant is easier to apply than traditional wax - spray it onto a microfibre applicator or cloth, apply it in a cross hatch motion working on one panel or small area at a time, leave it to cure for 1 minute  - not allowing it to fully dry - then buff with a clean, dry microfibre cloth.  For the very best results wait at least one hour, then apply a second coat.

For boats with paintwork in better condition, we do another kit with just the High Gloss fine grade polish, Panel wipe and Paint Sealant.

Option - Make the job easier, add our fantastic quality Microfibre Blue Applicator Pads and Polishing Cloths

Made by the company that invented microfibre in the 80's, we do not believe you will find better quality - add to your order for just £3 per item.  Both items are machine washable and can be reused for years to come

The Blue Polish Applicators are just under 6" across (140mm) and have a pocket on the rear for your fingers.  Super soft to prevent scratches, they have no nylon hems, are lightweight, absorbent and quick to dry

Perfect for polishing off, the Yellow Cloths are extremely thick, soft and plush - heavyweight 550gsm cloth, they can be laundered over 500 times - 40cm x 40cm size (just under 16" square) - no comparison to the cheap microfibres you'll see elsewhere, which are often only 200gsm weight or less

Laundering instructions for the applicators and cloths

Both items are recommended to be washed at around 30-40 degrees for economy, but the quality is such that you can wash them at up to 95 degrees if required.  Slight shrinkage in the first few washes will happen. It's best not to use fabric softener/conditioner, it leaves a coating on the fabric and stops the microfibres from working as well as they should.

Both items actively benefit from tumble drying - it opens up the fibres.  Unlike most cheap microfibres, our threads will not burn at higher temperatures

Previous Parrotsol customer for polishes?

You may be wondering why the account name has changed from "Parrotsol" to "Parrotsol Central".  Jeremy, who founded the business, is retiring and I have taken over - he is running the last of his stocks down currently.  Ebay rules do not permit the transfer of accounts, hence the new account.  Rest assured this is exactly the same top quality polish that you have bought from him in the past.