• This tool interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.
  •  
  • Not Fits:
  • 1.For 2001 Audi A6 2.8l；
  • 2.For 2003 Audi Allroad Quattro 2.7t (bi-turbo)
  • 3.For 2002 VW Passat's 2.8L 30 V；
  •  
  • Fits:
  • For Audi A4, A6 2.4 (97+)
  • For Audi A4, A6 2.8 (97+)
  • For Audi S4 2.7 turbo (97+)
  • For Audi A4, A6, A8 2.8 30v (95+)  
  • For VW Passat 2.8 30v (96+)
  • For VW Passat V6 5 Valve 1998-2005
  •  
  •  

    • US FOR VW AUDI V6 CAMSHAFT ALIGNMENT ENGINE TIMING LOCKING HOLDING TOOL S4 A6

    This tool interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.

     

    Not Fits:

    1.For 2001 Audi A6 2.8l；

    2.For 2003 Audi Allroad Quattro 2.7t (bi-turbo)

    3.For 2002 VW Passat's 2.8L 30 V；

     

    Fits:

    For Audi A4, A6 2.4 (97+)

    For Audi A4, A6 2.8 (97+)

    For Audi S4 2.7 turbo (97+)

    For Audi A4, A6, A8 2.8 30v (95+)  

    For VW Passat 2.8 30v (96+)

    For VW Passat V6 5 Valve 1998-2005

     

     

    Specifications:
    Holder Length:27.36’’X1.96’’(69.5 X 5 CM)


    Features:
    Use to hold/secure both camshafts at TDC position when replacing timing belt.

    Pin: Special designed for fixing the crankshaft angle. Correct timing adjustment. Crankshaft lock pin holds crankshaft at TDC (top dead center) when removing and installing toothed timing belt and flywheel/drive plate.

    Holder: This tool interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.

     

    Package Included:

    1Pcs Pin

    1Pcs Camshaft Holder

    1Pcs 18mm Locking Pin


    Please note:
    This tool is only applicable to V6 5-valve engines installed in VW & Audi platforms from 1997-2005. It is not applicable to any 2-valve engines or the 2002 3.0L, 4-cam engine.


    Item Specifics
    Brand hdautoworld
    Manufacturer Part Number HD105494US170
    Warranty 1 Year
    Type Engine Timing Tool
    Holder Length 27.36
    Fits 1 For Audi A4, A6 2.4 2.8 1997-2005
    Fits 2 For VW Passat 2.8 V6 5 Valve 1998-2005
    Notes 1 Not Fits 2001 Audi A6 2.8l;2002 VW Passat's 2.8L 30 V；
    Notes 2 Not Fits 2003 Audi Allroad Quattro 2.7

    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. We accept payment via PAYPAL only. 

    2. Payment must be made within 4 days of auction closing. 

    3. Total amount due includes the final auction price plus S&H(Shipping and Handling). 

    Shipping

    1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
    2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
    3.We ship to US ONLY.
    4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
    5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.

    Returns

    All of our brand new items come with a 30-Days money-back guarantee.
    We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
    Shipping & handling cost are not refundable.
    Man-made damage by abuse or wrong operation is not covered by this warranty.
    No product liability insurance is assumed.

    Contact Us

    If there have any question pls contact us first(send us ebay message),we will try our best to help!

    Feedback

    1.Once we have received your order, a feedback will be automatically sent to you.

    2.Please let us to know if you have not received our feedback, we will give feedback manually.

    3.If there's any question or problem before leaving feedback, feel free to contact us please, we will try our best to solve it.

    If you feel that we deserve a neutral or negative feedback, please, CONTACT US before leaving any feedback, give us a chance to make things right and leave your a good impression! 

    Shop Category
     Store Home
     Hydraulic Lifter&Roller Lifter
     Timing Solenoid Valve
     LED headlight Assembly
     Running Board Motor
     Fuel Pump
     Window Switch
     Water Pump
     Engine Mount
     Regulator Rectifier
     Cylinder Head Gasket Sets
     Exhaust System Parts
     Alternator
     PTO Clutch
     intake Manifold
     Intake Hose
     winch
     AC Compressor
     Timing Belt Kit
     Cold air intake kit
     Dash cover
     Clinder piston gasket kit
     Window Regulator
     car tool
     Turbocharger
     Tire Pressure Sensor
     Ignition coil
     Drive shaft
     CV Axle Assemblies
     Cv Axle
     Complete Strut
     Lift Support
     Bumper
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    US FOR VW AUDI V6 CAMSHAFT ALIGNMENT ENGINE TIMING LOCKING HOLDING TOOL S4 A6

    This tool interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.

     

    Not Fits:

    1.For 2001 Audi A6 2.8l；

    2.For 2003 Audi Allroad Quattro 2.7t (bi-turbo)

    3.For 2002 VW Passat's 2.8L 30 V；

     

    Fits:

    For Audi A4, A6 2.4 (97+)

    For Audi A4, A6 2.8 (97+)

    For Audi S4 2.7 turbo (97+)

    For Audi A4, A6, A8 2.8 30v (95+)  

    For VW Passat 2.8 30v (96+)

    For VW Passat V6 5 Valve 1998-2005

     

     

    Specifications:
    Holder Length:27.36’’X1.96’’(69.5 X 5 CM)


    Features:
    Use to hold/secure both camshafts at TDC position when replacing timing belt.

    Pin: Special designed for fixing the crankshaft angle. Correct timing adjustment. Crankshaft lock pin holds crankshaft at TDC (top dead center) when removing and installing toothed timing belt and flywheel/drive plate.

    Holder: This tool interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.

     

    Package Included:

    1Pcs Pin

    1Pcs Camshaft Holder

    1Pcs 18mm Locking Pin


    Please note:
    This tool is only applicable to V6 5-valve engines installed in VW & Audi platforms from 1997-2005. It is not applicable to any 2-valve engines or the 2002 3.0L, 4-cam engine.

    Item Specifics
    Brand :hdautoworld
    Manufacturer Part Number :HD105494US170
    Warranty :1 Year
    Type :Engine Timing Tool
    Holder Length :27.36
    Fits 1 :For Audi A4, A6 2.4 2.8 1997-2005
    Fits 2 :For VW Passat 2.8 V6 5 Valve 1998-2005
    Notes 1 :Not Fits 2001 Audi A6 2.8l;2002 VW Passat's 2.8L 30 V；
    Notes 2 :Not Fits 2003 Audi Allroad Quattro 2.7


    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

    1. We accept payment via PAYPAL only. 

    2. Payment must be made within 4 days of auction closing. 

    3. Total amount due includes the final auction price plus S&H(Shipping and Handling). 

    1.Our shipping rates include the cost of shipping,handling,packaging and related manpower costs.
    2.All item will be shipped by USPS&Fedex within 1 business days,It takes approximately 3-8 workdays.
    3.We ship to US ONLY.
    4.All items will be shipped to buy's paypal address.Please check your paypal address is right.
    5.We are not responsible for wrong or undeliverable address.We reserve the right to charge the shipping fee again for returned items due to wrong address.

    All of our brand new items come with a 30-Days money-back guarantee.
    We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.
    We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.
    We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.
    Shipping & handling cost are not refundable.
    Man-made damage by abuse or wrong operation is not covered by this warranty.
    No product liability insurance is assumed.

    If there have any question pls contact us first(send us ebay message),we will try our best to help!

    1.Once we have received your order, a feedback will be automatically sent to you.

    2.Please let us to know if you have not received our feedback, we will give feedback manually.

    3.If there's any question or problem before leaving feedback, feel free to contact us please, we will try our best to solve it.

    If you feel that we deserve a neutral or negative feedback, please, CONTACT US before leaving any feedback, give us a chance to make things right and leave your a good impression! 


    All rights reserved.