"WETSOON" GRP BOAT OSMOSIS CONTROL UNIT "WITH MOUSE"

This product is produced and calibrated for "GRP BOATS". It is very suitable for this job.

INFORMATION FOR USE:

 1)   LIFT THE BOAT TO SHORE AND WAIT ONE OR TWO DAYS TO DRY.

 2)  TURN THE POWER SWITCH "ON", REPLACE THE BATTERY IF THE RED LIGHT IS NOT LIT .

 3)  HOLD THE UNIT WITH THE " RIGHT or LEFT " HAND AND PUSH THE "RESET" BUTTON.

 4)  THE BACK SIDE OF THE "MOUSE UNIT" SHOULD BE GENTLY TOUCH THE SURVEYING SURFACE OF BOAT. (PLEASE DON'T SWEEP).

 5)  WAIT 4 SECONDS ON SURFACE FOR WRITING MOMORY.

 6)  FOR A NEW MEASUREMENT PUSH THE "RESET BUTTON" TO EREASE MEMORY . 

 7) TAKE VARIOUS MEASUREMENTS FOR EVERY 1 TO 2 METERS ALONG YOUR BOAT SURFACE.

 8) IF THE MEASUREMENT VALUES ARE HIGH (RED AREA ON THE METER), DEEPER  RESEARCH MAY BE REQUIRED.

  9)  IF YOU DON'T WANT TO HEAR THE SOUND, TURN THE SOUND SWITCH "OFF".