Very Good Condition - ARC Count Less than 2000.
Note the pictures are of one of the units, actual product may differ slightly as we have multiple units.
Please message us if you require a large quantity of splicers, discounts will apply.
Fujikura 12S SM MM Fixed V-Groove Fiber Fusion Splicer
Fujikura 12S SM MM Fiber Fusion Splicer
The Fujikura 12S is the world?s smallest, lightest and most portable fusion splicer available today. Despite its incredibly small size, this ruggedized, full-featured unit offers unmatched versatility for splicing in the most challenging environments. The innovative transit case and work tray provide multiple options for the best utilization of available work space while the long life battery provides power for up to 100 splice cycles which include application of the splice protection sleeve.
The Fujikura 12S incorporates features typically found only in more expensive models. The large 4.5" monitor provides a crystal clear image, even in the brightest sunlight, for evaluating splice quality. The electrode life has been extended to 3,000 splices, minimizing downtime for replacement and stabilization. Software updates are accomplished via the internet allowing users to quickly update their software as new splice programs become available. The fully ruggedized chassis provides for shock, dust and moisture protection while the two camera observation system provides for accurate fiber alignment and loss estimation calculations. The Fujikura 12S is also fully compatible with the FuseConnect line of fusion installable connectors.
Backed by the best service team in the industry, the Fujikura 12S is the ideal splicer to use when portability, ruggedness, versatility and reliability are needed for your splicing application.
Features:
Applications:
Model | Fujikura 12S Fusion Splicer |
Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DSF (G.653), NZDS (G.655) |
Cladding Diameter | 125 µm |
Coating Diameter | 250 µm or 900 µm |
Fiber Cleave Length | 5 mm to 13 mm |
Typical Average Splice Loss | 0.05 dB (SM), 0.02 dB (MM), 0.08 dB (DS) and 0.08 dB (NZDS) |
Splicing Time | Typical 15 sec with SM |
Arc Calibration Method | Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available |
Splicing Modes | Total 100 splice modes |
Splice Loss Estimate | Based on dual camera cladding alignment data |
Storage of Splice Result | Last 2,000 splices |
Fiber Display | 4.5 inch TFT color LCD with X or Y view or both X and Y view simultaneously |
Magnification | 100X magnification for X/Y view |
Viewing Method | 2 axis CMOS camera |
Operating Condition | Altitude: 0 to 3,660 m above sea level, 10° to 50° C, Humidity: 0 to 95% RH, non-dew |
Mechanical Proof Test | 1.96 N |
Tube Heater | 30 heating modes |
Tube Heating Time | Typical 30 sec with FP-03 (60 mm) sleeve |
Protection Sleeve Length | 60 mm, 40 mm, micro |
Splice/Heat Cycles with Battery | Typical 100 cycles with BTR-10 |
Electrode Life | 3,000 splices |
Power supply | Auto select from 100 V to 240 V with AC adapter, 14.8 V DC with installed battery |
Terminals | USB 2.0 |
Wind Protection | Maximum wind velocity of 15 m/s. (34 mph) |
Dimensions | 121 x 162 x 57 (mm) / 4.76 x 6.38 x 2.24 (inches) |
Weight | .776 kg (1.71 lbs) with battery |