A further highlight is SteadyClock FS,RMEs latest clock technology for maximum jitter suppression and lowest self-jitter. It guarantees superb sound quality completely independent from the quality of the current reference clock. The ADI-2 FS also uses the conversion technology of the ADI-2 Pro: the AK557x family and the AK4490 not only offer 192 kHz sampling frequency and lowest distortion, but also a dynamic range of 120 dBA. But the ADI-2 has more to offer than tremendous sound. It also provides exciting digital connectivity. Its coaxial RCA SPDIF I/O has a switchable Channel Status to make it fully AES/EBU compatible (cable adapter required). The optical TOSLINK I/Os can handle up to 192 kHz and also serve as ADAT I/O, even at 192 kHz. An operation with SPDIF input and ADAT output or vice versa is supported, in both AD/DA and D-D mode. The clear layout and distinct labeling of the front panel with its functional buttons, the informative status display, a 6 LED level meter as well as the tidy back panel make it easy to operate the unit right out of the box.
The ADI-2 FS uses a down-scaled version of the ADI-2 Pro's Extreme Power output stage. With power of up to 0.7 watts per channel, 0.1 ohm output impedance, a maximum output level of +19 dBu and very low THD (-110 dB), the High Power² circuitry is universally applicable. A relay ensures click-free on and off switching. Power is supplied via an included, external switching power supply with lockable connector. Thanks to a wide operating voltage range of 9 - 15 volts, the ADI-2 FS can be easily used with battery or rechargeable battery, thus also for mobile use. It is also fully suitable for e.g. a galvanic isolation in the laboratory or measuring applications.
Box Contains
-
RME ADI-2 FS High-Precision 192 kHz 2-Channel AD/DA Converter
- External Power Supply
- Line Cord for Power supply
- Car Cable
- Cable for Storage Battery
-
RME ADI-2 FS High-Precision 192 kHz 2-Channel AD/DA Converter
- External Power Supply
- Line Cord for Power supply
- Car Cable
- Cable for Storage Battery
| Brand | RME |
| Form Factor | AD/DA Converter |
| Type | Audio Interface |
| Analog AD | Signal to Noise ratio (SNR) @ +19 dBu: 117 dB RMS unweighted, 121 dBA Frequency response @ 44.1 kHz, -0.1 dB: 5 Hz – 20.5 kHz Frequency response @ 96 kHz, -0.5 dB: 3 Hz – 45.5 kHz Frequency response @ 192 kHz, -1 dB: 2 Hz – 92.7 kHz THD @ -1 dBFS: -114 dB, 0.00015 % THD+N @ -1 dBFS: -112 dB, 0.00025 % Channel separation: > 110 dB Max Input Level AD: +19 dBu Input: XLR or 1/4" TRS, electronically balanced Input impedance balanced: 36 kOhm, unbalanced: 18 kOhm Input sensitivity switchable: +4 dBu, +13 dBu, +19 dBu @ 0 dBFS |
| DA | Signal to Noise ratio (SNR): 117 dB RMS unweighted, 120 dBA Frequency response @ 44.1 kHz, -0.1 dB: 10 Hz – 20.2 kHz Frequency response @ 96 kHz, -0.5 dB: 5 Hz – 44.9 kHz Frequency response @ 192 kHz, -1 dB: 3 Hz – 88 kHz THD @ -1 dBFS: -112 dB, 0.00025 % THD+N @ -1 dBFS: -110 dB, 0.00032 % THD @ -3 dBFS: -116 dB, 0.00016 % Channel separation: > 110 dB Max Output Level DA: +19 dBu Output: XLR balanced, 1/4" TRS unbalanced/balanced Output impedance: XLR balanced 150 Ohm, TS unbalanced 100 Ohm Output level switchable: +4 dBu, +13 dBu, +19 dBu @ 0 dBFS |
| DA - Phones | Output: 6.3 mm stereo TRS, unbalanced Output impedance: 0.1 Ohm Output level at 0 dBFS, load 100 Ohm or up: +19 dBu (6.9 Vrms) Max power 32 Ohm load: 0.7 W per channel (0.01% THD, +16 dBu, 4.9 Vrms) THD 32 Ohm load @ +15 dBu: -110 dB, 0.0003 % |
| Mode ANA (Analog In to Analog Out) | Signal to Noise ratio (SNR) @ +19 dBu: 123 dB RMS unweighted, 126 dBA Signal to Noise ratio (SNR) @ +13 dBu: 119 dB RMS unweighted, 122 dBA Signal to Noise ratio (SNR) @ +4 dBu: 112 dB RMS unweighted, 115 dBA Frequency response -0.5 dB: 1 Hz – 120 kHz THD+N @ +19 dBu: -116 dB, 0.00016% Channel separation: > 120 dB Maximum input / output level: +22 dBu |
| DIGITAL | Clocks: Internal, ADAT In, SPDIF In Jitter suppression of external clocks: > 50 dB (2.4 kHz) Effective clock jitter influence on AD and DA conversion: near zero PLL ensures zero dropout, even at more than 100 ns jitter Digital Bitclock PLL for trouble-free varispeed ADAT operation Supported sample rates with external clocking (SPDIF): 28 kHz up to 200 kHz Supported sample rates with external clocking (ADAT): 40 kHz up to 49 kHz Internal clocks: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz, 176,8 kHz, 192 kHz |
| Digital I/O | Digital input coaxial ground-free transformer coupled Formats: optical (TOSLINK), RCA (SPDIF, AES/EBU compatible) Format Consumer SPDIF according to IEC 60958 Format Professional according to AES3-1992 Amendment 4 |
| SPDIF coaxial | RCA, according to IEC 60958 High-sensitivity input stage RCA: < 0.2 Vpp input level Output voltage RCA Consumer 0.7 V, Professional 1.4 V Single Wire mode, sample rate 28 kHz up to 200 kHz |
| SPDIF optical | 1 x optical, according to IEC 60958 Sample rate 28 kHz up to 200 kHz |
| ADAT | TOSLINK Standard: 8 channels 24 bit, up to 48 kHz Double Speed (S/MUX): 4 channels 24 bit 96 kHz Quad Speed (S/MUX4) : 2 channels 24 bit 192 kHz |
| General | Included power supply: external switching PSU, 100 - 240 V AC, 2 A, 24 Watts Idle power consumption: 5,2 W (430 mA @ 12V) Max. power consumption: 10 Watts (830 mA @ 12 V) Dimensions (WxHxD): 215 x 44 x 130 mm (8.5" x 1.73" x 5.1") Weight: 900 g ( 2.0 lbs) Temperature range: +5° up to +50° Celsius (41° F up to 122°F) Relative humidity: < 75%, non condensing |
PayPal is our only method of payment. Your PayPal account must be a Verified PayPal account.
Selecting "Immediate Pay" is the way to go. If you select eCheck, it may take 2-8 days to clear PayPal.
Please include a phone number as UPS and our Trucking Companies require it.
We prefer to ship to a confirmed PayPal address and whether yes or no we may still contact you for additional verification.
For shipments in NY&CA, we are required to collect the appropriate sales tax.
Most purchases are shipped within 24-48 Business Hours
Items with "free shipping" are only shipped free to the 48 contiguous United States.
We supply tracking information directly to your eBay account as well as via email within 24 hours after the shipment leaves our warehouse.
Downtown Photo is proud to offer a 30 day return or exchange policy on most items for a full money back refund, excluding any shipping charges (for items which we offer free shipping, our standard shipping charges will be deducted from any refund or credit)
Returned or exchanged products must be in brand-new, mint condition. Items must be in the original, undamaged manufacturer's packaging with all packaging materials, including instruction booklets, packing inserts, and the blank warranty cards. Memory cards and any other Blister Pack items are not returnable once opened. Any merchandise missing the original Universal Product Code (UPC) cannot be returned. The manufacturer's labeled packaging must be enclosed within an additional shipping carton. Please do not place stickers or shipping labels on the original manufacturer's package.
Please be aware that we cannot accept returns on the following items unless they are shown to be defective in manufacture (as decided by the manufacturer):
- Underwater equipment (once taken underwater
- Inkjet printers (once ink cartridge/ribbon has been installed)
- Processing equipment (once used with chemicals)
- Educational DVDs, Tapes and Books once opened
- Blister-packed items once opened
- Original manufacturer software once opened
Please enclose a copy of your invoice with your return and tell us whether you would like the item to be replaced, exchanged, or refunded.
Returns can take up to 5 days in-house from the date we receive it to process. When returning an item, please make sure you use a shipper which provides you with Insurance and a tracking number. Items returned without a tracking number might take much longer to be processed.
